Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Making plastic inset blocks on feature rings

Posts

Making plastic inset blocks on feature rings

#1

Making plastic inset blocks on feature rings

albertabob

>I am trying to make a segmented bowl after the pattern shown in Ray Allens book authored by Dale Nish.

(Woodturning with Ray Allen)

He mentions using turquiose powder and plastic resin.

That's a bit sketchy for me.

Has anybody done this and what are your recomendations?

I was thinking of using Dental Acrylic but I can't find a turquoise solid additive for the colour.

Bob

Re: Making plastic inset blocks on feature rings

#2

Re: Making plastic inset blocks on feature rings *LINK*

Mark Kauder, Phenix City, AL

>Check out Craft Supplies (www.craftsupplies.com) and look for INLACE, you can get all sorts of Filler for it.

Also check out the link below.

Mark


http://www.arizonasilhouette.com/Crushed_Stone.htm

Re: Making plastic inset blocks on feature rings

#3

Re: Making plastic inset blocks on feature rings

Albertabob

>Thanks Mark.

That was nice and quick!

regards

Bob

Re: Making plastic inset blocks on feature rings

#4

Re: Making plastic inset blocks on feature rings

The Wood Spinner / Bill Hale

>I have real turquoise stone and I grind it in a coffee grinder. You can grind as fine as you want. I like mine a little chunky.

As inlace is not actual stone it is a lot easier to work with. You can make blocks and put them in the glue up as it will turn and not damage your tools. The real stone must be added after you turn.

Good turning and be safe

Bill in Casa Grande, AZ.

Re: Making plastic inset blocks on feature rings

#5

Re: Making plastic inset blocks on feature rings

Mike from St. Clair Shores

>Last night I got together with a bunch of turners and one of the guys brought a piece with some turquoise inserts. He said he used a turquoise pen blank and cut it into the small pieces. It looked great.

Mike