big bowl
John Lucas
>Have a spare tractor laying around and a lot of wood and glue. Turn one of these. At least if the bowl flys apart it will fly away from you. A flopping tractor with the remainder of the bowl might be a little dangerous.
Knowledge You Can Build On — Est. 1998
big bowl
John Lucas
>Have a spare tractor laying around and a lot of wood and glue. Turn one of these. At least if the bowl flys apart it will fly away from you. A flopping tractor with the remainder of the bowl might be a little dangerous.
That is not a bowl !!! .
Fred in NC
>It is the dome for some building !!!!
Re: big bowl
Ron in Drums PA
>Can you imagine the salad you can make in that!
glad i don't have to sand that one
steve antonucci
>We're going to need your source for that one... It's too good of a teaser to not read the details!
Steve
Re: glad i don't have to sand that one
David
>How big was the chainsaw you used to cut that blank?
Good luck with the microwave drying.
a wooden swimming pool :-)
Carles, in Barcelona
>
Re: big bowl
Jennifer@Indy.USA
>John, I have been known to be pretty gullible....but please tell me this is Photoshop induced, and not for real!
Jen
Re: glad i don't have to sand that one
John Lucas
>Steve Sanding was what I though of as well. I don't have a source because the photo was just sent to me on e-mail.
Re: big bowl
John Lucas
>Jennifer Could be photoshop but I don't think so. There is a guy in Georgia who turns bowls like this as forms for making fountains. I don't know if his are this large or even if that is him doing it but it sure likes hairy to me.
Re: big bowl
Paul in Phoenix, AZ
>It looks like his face shield is up. Spos if the bowl blew up, a face shield isn't gonna make much diffrence either.
Re: big bowl
The Wood Spinner / Bill Hale
>Now that is an idea for a small spa. I am not crazy enough to do this big. One error and he is dead.
Bill in Casa Grande, AZ.
Re: big bowl
Wally Dickerman in Arizona
>I'd have turned it thin-walled....is he wearing gloves?
Wally
For Corn Flakes?
Thomas Skaggs, Foothills of Mount Level
>That's a cereal bowl for Jethro Bodine! ;-)
Tommy
Re: big bowl
CapeMayMike
>Wow, I think he's wearing a pocket tee-shirt! ;^)
Too bad it's not natural edge
Phil Joines Krum, Texas
>
Re: big bowl
Paul in Phoenix, AZ
>Can you imagin the figure 8 calipers to measure wall thickness? If the center of the bowl is do 50 rpm, what rpm is the rim doing?
just 3 more and he can drive the tractor away
Barry Irby
>
Re: answer: 50 RPM
Danny Wells
>
Ok, but...
Paul in Phoenix, AZ
>...the speed of the wood coming by the gouge at the rim would be faster than at the center?
ROTFLOL!
Dominic Greco in Richboro PA
>
"I'd have turned it thin-walled....is he wearing gloves?"
Wally! You're BAD!
:>)
See ya around,
Dominic
Re: big bowl
Bruce Wiseman
>Hey Jen,
Something to try in your bowl class?
:-)
Do You Really Hate Sanding ? ? ?
Barry Turner
>Do you guys really hate sanding that much? I really don't hate sanding. Sanding is where you "make or break" a piece. With that in mind, I always try to sand thoroughly without skipping grits........ maybe I can compensate for my poor turning skills if I learn to sand really well.
Re: big bowl
Ric Taylor
>As long as he is on the inside of the bowl, he won't be touched by anything when it blows up.
You're referring to "surface speed"
Pete in Holland, MI
>
Re: big bowl
Pete in Holland, MI
>I had seen this a couple weeks ago. Tractor looks European. Have no other details. Stumbled across a web site where a group of Australians built a lathe out of a truck axle and turned it thru the PTO of a large tractor. Seems they laminated up and turned a bowl around 8' in diameter. This photo, based on an average sized man, appears to be an 18' diameter bowl.
Think about the vertigo problems having your direct line of sight, along with your peripherial, viewing the world turning CCW ?!?