Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

Turning glove

Posts

Re: Turning glove

#26

see above, spindle vs faceplate

TDaniel

>Bill, it makes a big difference whether you are turning between centers or on a faceplate. With a faceplate there is nothing to wrap around, it merely would slip off the end. I can see some potential for a loose string to tangle around a spindle. I'll continue to wear my tight fitting roper gloves (all leather), without fear, for my bowl roughouts. If you feel this is dangerous then you should not do it.

TD

Re: Turning glove

#27

Re: There is ONE simple rule *LINK*

JKJ in East TN

>>Keep your fingers behind the tool rest when the wood is spinning.

With all due respect, I don't think this kind of advice is useful. That's like saying "keep the car on the road" or "if you wear loose clothing keep it away from the spur drive."

To insure that your fingers can never even ACCIDENTALLY get past the tool rest would require an obtrusive guard that would prevent you from doing any useful woodturning. As one person mentioned above, in the event of an accidental move it is far preferable to fix cut and torn skin than deal with fingers and hand mangled and ripped from the body.

Again, it's all about evaluating risk and in a home situation, how much risk each indivdual is willing to assume. (In an industrual situation, this is usually done for you.) However I feel it is very important that we each learn and understand the risks. (The first thing I did when I got my tractor was to read all I could find about how people have died using tractors.

It is interesting to read of the lathe injuries people on WC have reported, some by doing things they never intended. I don't think Angelo ever intended to catch his sleeve on the spur drive.

JKJ


Turning Injuries: Learning the Hard Way

Re: Turning glove

#28

Re: Dale Nish notes...

Joe Herrmann

>This very question was posed to Dale Nish in a recent "Ask Dale" column in Woodturning Design. He noted that he wears a glove when roughing out material and said that he doesn't know of a single accident on a wood lathe caused by wearing a glove. I don't regularly wear a glove but have when the occasion warrants it.

Joe

Re: Turning glove

#29

Re: Turning glove, oxymoron? No, Much Worse!

albertabob

>William Duffield

What's the point of your questions?

Answer

To discuss to learn, to enlighten, to elucidate to proffer a different perspective.

William Duffield

Assuming he had not been wearing a glove, is your implication that perhaps if he had been wearing a glove he would not have been pulled into the lathe?

Answer

No, the conversation was about wearing gloves and I wanted to know if you second hand anecdotal information was pertenant to the topic?

BTW I still don't know for sure.

William Duffield

Assuming that the distraction was a contributing factor to the accident, are you implying that one should only use a lathe when there is absolutely no possibility of distraction, real or imagined, from any source?

Answer: Nope, just wondered if the presence of an "inspector" on the mans' station might have rattled him?

William Duffield

The point I was trying to make with this anecdote is that lathes are dangerous, and we should try to do whatever we can to mitigate that danger. In this case, the issue that got the safety person involved was machine guarding, which if it had been implemented according to the industrial standards for this machine, should have prevented the worker from getting the catch that killed him. Wood lathes used in non-commercial, non-industrial applications, do not have these government-mandated safeguards, so the user has to use some intelligence to protect him or herself.

Answer: Thanks for the heads up.

I'll definitely keep your information in mind.

I just knew I could count on the Government to protect me.

Regards

Bob

Re: Turning glove

#30

Re: Turning glove

Wally Dickerman in Arizona

>In my many years of woodturning (since 1936) I've never heard of anyone being injured while wearing gloves while turning. I don't wear them often, but when I have they've protected my hands rather than causing an injury. I've also never been hit by a flying bowl, but it could happen tomorrow. We take our chances every time we flip the switch on the lathe.

Wally

Re: Turning glove

#31

Re: Turning glove

Barry Irby

>I wear a glove when roughing or turning dry wood. It's and old tight fitting leather glove I used to use gardening. The finger tips wore out and I cut them off and recycled it into a turning glove. I only wear it on my left hand and mostly because of the chips hitting it and they are abrasive and hot sometimes.

The glove is leather, tougher than my skin, slicker than my skin and close fitting. I believe it has protected me from a number of minor unpleasant injuries. I am considering one for the right hand as I am working on becoming more ambidextrous.

Pardon the pun, but, OTOH, I would NEVER wear cloth glove turning. It just SEEMS to me to be at the other end of the spectrum. I am quite sure a cloth glove is an accident waiting to happen. Maybe the leather glove is too, but I think the leather glove will wait much longer, cloth gloves are planning an accident today at the latest.