Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

lathe brands

Posts

lathe brands

#1

lathe brands

Charles Self

>I'm working on a book that requires some spindle turning, which is not a problem. What I'd like to do, though, is offer readers a look at a wider variety of lathes than those I'm familiar with--Craftsman; Delta; General; Grizzly; Jet; One Way; Powermatic for the most part. I know durned well I'm missing a goodly number, so will appreciate some leads.

Re: lathe brands

#2

Vicmarc *LINK*

CapeMayMike

>Vicmarc


http://www.vicmarc.com/

Re: lathe brands

#3

Nova DVR

Carole in VA

>

Re: lathe brands

#5

Record lathes.

John Lucas

>Record lathes have been around for a good while.

Re: lathe brands

#6

Oneway

Peter Teubel

>

Re: lathe brands

#7

Re: lathe brands

Mike Swain

>Silverdrive from the UK, they were the original designers and manufacturers of the Poolewood Euro lathes. They now build a wide range of their own.

http://www.silverdrive.co.uk/hermes/shop/10,1,10

Regards....Mike

Re: lathe brands

#8

More on lathe brands

Charles Self

>I appreciate the help with lathe brands. Unfortunately, I wasn't specific enough. The book is aimed at starting to mid-range general woodworkers, with a need in about three quarters of the projects for slender spindle turnings.

Basics: I'm looking to introduce people to turning; I am looking to do so with reasonable economy (say $650-$750 and down). I know that limits brands, but, sheest, I hadn't realized just how few brands of mid to low range lathes are out there these days, without going to Harbor Freight versions. Record, unfortunately, seems to be dead. Their web site hasn't been updated since 2001, back in the days slightly before Rubbermaid took over. Most of the rest are mini-lathes,with maybe one exception. Craftsman has a couple of mid-range lathes.

Fisch has one, if I can locate their prez. Their stuff is always interesting, and usually well made.

Of course, I'll look at the Delta, Jet, General offerings in the one grand range, too, but I had really hoped to be able to list about six at half that price.

U.S. distribution is best, too.

It's going to be enough work just detailing basic alignment and tool sharpening without going to roughly made low end lathes and telling the readers to break out the portable grinders and whatnot. I'll do it if I have to, but I'm lazy whenever possible these days.

Re: lathe brands

#9

Re: More on lathe brands *LINK*

David

>I use a Fische. When I first got interested, I found one that a turning club president was selling - he had won it, didn't need it, and was waiting for a newbie to come along and buy it at a pretty bargain price. It has worked out very well for me, but I will say that I heard an equivalent delta the other day, and it was whisper quiet compared to mine.

If you have any specific questions about the Fische lathe, let me know - I don't know anybody else who has one, and I'll be glad to help you out if I can.

Anyway, here's a link to Fische


http://www.toolcenter.com/fisch/turningcenter.htm

Re: lathe brands

#10

Vicmarc

Jorge Castaneda~Downeast Maine

>

Re: lathe brands

#11

American Woodworker chart *LINK*

Phil Joines Krum, Texas

>I don't know how current this is but it's pritty inclusive.


Chart

Re: lathe brands

#12

Re: More on lathe brands

Bob Sheppard

>I'm not at all familiar with them, but Grizzly has a couple of lower-priced lathes that might be appropriate for your book.

My pet pieve with existing lathes is that there aren't many that are good for spindle turning. I"m currently turning a newel post for a customer that's 48" long, and I have to do it in 2 pieces on my current lathe. There aren't too many lathes out there that can handle anything longer than that.