Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

Symposium Report (LONG)

Posts

Symposium Report (LONG)

#1

Symposium Report (LONG)

Bill Grumbine (Kutztown PA)

>Greetings all

I just arrived home this morning from the Totally Turning weekend up in Albany, and am catching up on the pile of email and such waiting for me. Since I am here at the machine, I thought it would be a good time to report on my experience at the symposium. I would like to preface my remarks that what I am about to write adds to my previous experiences. It does not negate them. I write that because things I have experienced in the past duing my interactions with certain people and groups have been, shall we say, less than positive, and I have been very vocal about that. This one was different, and I intend to be just as vocal.

Simply put, I had a blast. I got to meet a lot of people, see a lot of turnings, and even learnt a thing or two. It was a little disconcerting to have a continual stream of people coming up to me who I had never seen before in my life and calling me by name, but I got used to it after a little while. If you are one of those folks who did so, I would like to thank you again for stepping up and introducing yourselves, and I thank you for all the kind and positive things you all had to say about the DVD. For the record no one said anything negative about the DVD, and that is a good thing too.

I got to see some friends of mine I hadn't seen for a while, as well as a number of past students. It would have been nice to see some of them bringing work along for the instant gallery, but that is a personal decision. I will write more about the gallery in a bit. I got to meet some people who I only knew through this medium, by their postings and their pictures. With some there was some private correspondence as well, but in all cases, it was great to be able to put a face and a voice with the name. I got to meet some really big shots in the AAW - at least people who are very well known. I was quite surprised to learn that most of them already knew who I was as well. I don't know if that is a good or a bad thing. A number of people asked me if I was having a good time, as if I was some sort of guest as a special resort and they were all employees. I can't help but think that those inquiries were a result of past postings on my part. I know that at least some of them were, since the questioners sometimes referred to them.

I had a running conversation for much of the weekend with Andi Wolfe. She came up and introduced herself to me with a nice big smile, and then delivered a well deserved shot about artsy fartsy stuff, which got the conversation going. We got to clarify a few things, and overall have a very pleasant time together. I even made it to one of her rotations, although I will have to speak to the organizers next year about how they schedule those things. They need to make sure that the ones I want to go to don't take place simultaneously! But Andi and I got to talk about turning in general, art, attitudes and experiences, and all that goes along with it. While I cannot speak for her with any authority, I know I left with a better understanding of some of the art aspect, and I think she understands my perspective a little more. A while ago I was challenged by another poster on this forum to name the names of some who had treated me the way I described, and I would not, so as not to fan the flames. I did so for Andi in a person to person conversation.

The instant gallery was crammed with very good work at all levels of quality. I write it that way because people brought in stuff that was the best they could do, and that is what counts. It does not matter where a person is in their development as a turner, but it does matter that they are turning and developing. I heard a lot of people saying that they didn't want to bring something in because they would be embarassed in some way, and I do not think that would have been the case. Andi and Stuart Batty did an extensive critique of many of the pieces brought in, and they did a fantastic job I think. Of course that is easy enough for me to write. All three of my pieces came up for examination, and with a very few minor points, I got what I consider to be very high praise indeed. How did it affect me? Well let's just say I had to go down to the parking deck in the freight elevator so my head would fit in the doors. Overall, they found positive and encouraging things to say about every piece that was held up, although I do not think that anyone got away completely unscathed. But that is what a critique is supposed to do, right?

I spent a lot more money than I had intended, although I did keep my promise to SWMBO not to buy any wood. I never said a word about tools though, and I came home with a monster spur center for my Talon, a keyless chuck, and a random orbit air powered sander with 2" and 3" velcro disks. Oh yeah, at the last minute a gallon of Bush Oil fell into my bag too. I'll be interested to see how it stacks up against my current favorite Watco.

There was one black blot however. Ruth Niles was gracious enough to sell the DVD for me from her table, and some criminal made off with one without paying for it. So human nature really is still the same, even at a symposium. But overall, this was a very good experience, and I would have to say that it outweighs my bad experiences. I am sure I will still meet snobs, and those who make themselves better by putting others down, and I will meet those who think they have a patent on something they think is original, but I was very much gratified to see that things were better than they seemed in the past, and I will smile as I send in my check for next year's membership. Why, I might even go to another symposium sometime!

Bill

Re: Symposium Report (LONG)

#2

About the 2" and 3"...

Rob Steinle

>Thanks for your review and comments on the show. Your very positive comments might convince me into attending one next year.

About that 2" & 3" Random Orbit Air Sander - that fell into your bag at the show... (assuming you've used it by now...)

- How large of a compressor are you using (CFM, Tank Size, Etc)....?

- How many CFM does the RO sander specify for continuous use...?

- How long can you really sand before running out of air...? (not holding your breath... LOL)

Thanks,

Rob

Re: Symposium Report (LONG)

#3

Brad Vietje

Re: Symposium Report (LONG)

Brad Vietje

>Hey Bill,

Glad you had fun in Albany -- that's a very nice group, and a well-organized symposium. I had really hoped to get over there, but had to miss it because I'm in the middle of selling one house and buying another, so I couldn't get away -- and wouldn't live long once I got home if I had. I was priviledged to demonstrate at the first 2 Totally Turning symposia, and miss the people there. I hope everyone who went had fun, and I hope to make it over next year.

Safe Spinning,

Brad Vietje

Thetford (soon Newbury) VT

Re: Symposium Report (LONG)

#4

Keith Tompkins

Re: Symposium Report (LONG)

Keith Tompkins

>Thanks, Bill, As I arrived at the symposium, a booming voice said "Hi Keith!" In a hurry as usual, I glanced over and waved hi. Then I recognized Bill Grumbine! I shook his massive hand and was thankful for no broken bones (LOL)

I agree with Bill, Andi was a great representative for the AAW; open and available to the public, which I appreciated. Many times, the big demonstrators show up for their demos, then seem to disappear.

My friend Don Orr's demo was the hit of the symposium! Way to go Don!

Re: Symposium Report (LONG)

#5

Re: Symposium Report (LONG)

Mike from St. Clair Shores

>Bill,

I'm not sure if you remember my phone call I made to you many months ago. I complimented you on your DVD, asked you about the head gear/filter that you wear in the DVD and we talked about some other things like classes, if you would ever come up to Michigan and I asked if you liked fishing, etc., etc. At the end of the conversation, I said that maybe we would run into each other sometime in the future at a turning symposium. You said that you doubted it cause you didn't really go to them. I told you that I thought you should because many people have heard of you and that your DVD was making you somewhat of a celebrity.

Then I read on this forum that you were going to Totally Turning, and I was very glad for you.

I would have liked to have been there just to meet you but I was in Traverse City, MI attending a two day seminar with Richard Raffan.It also was wonderful.

This coming week-end I'm heading down to "Turning 2005" hosted by the Ohio Valley

Woodturners Guild. I'm glad to see that you had a positive experience and again I would like to say, "maybe I'll see you at a turning conference someday".

Mike (by the way I got the 3M Airstream 400 after I talked to you, thanks)

Re: Symposium Report (LONG)

#6

Re: Symposium Report (LONG)

Gary Ljostad

>Bill it was great to finally meet you. And thank you for the kindness you showed to my son Chris. He has been talking about you and all the other turners he met, non stop since he has been home. (we watched your vidio, and it deserves all the praise it has gotten.)

I would also like to thank all the folks at the Adirondak Woodturners Assoc. for putting on a great symposium, especially Ken Evins, Eric Mead, and Don Orr. You all did a wonderfull Job.

Thanks

Gary Ljostad

Re: Symposium Report (LONG)

#7

Re: Symposium Report (LONG)

AnthonyY

>Gary, I think seeing how Chris was so involved with the symposium was one of the best things of the weekend. Looks like he enjoyed himself. Andi's critique of his work seemed to be a nice ending.

I had a great time and even enjoyed the bus tour!!

Re: Symposium Report (LONG)

#8

Re: Symposium Report (LONG)

Steve Mushinski

>Great to hear Bill. One thing I need to add is about your video. It is not a good thing, no one has anything bad to say about it as how the heck are you going to improve anything you might do in the future. You also prove how wonderful an open mind can be!

Re: Symposium Report (LONG)

#9

Re: Symposium Report (LONG)

Steve Mushinski

>Keith,

I must disagree but I have only been to a couple of symposium's. I give them credit, as at these meetings everyone wants a piece of them. By the end of the day or weekend I am pretty sure they are just drained. You want to get to know the top dog's of the AAW executive. Stick around after the symposium's and help clean up, tear down. I found out this year they vacuum with the same end of the hose as the rest of us.

I must say one of the nicest times I had was a 2+ hour conversation with that movie star among us B.G.

Re: Symposium Report (LONG)

#10

Re: Symposium Report (LONG)

Bill Grumbine (Kutztown PA)

>Hi guys

Rob, I answered your question on the other forum, so check it out there if you don't mind. I am trying to catch up before I am out the door again for another two day ride to college and back! Ugghh!

Brad, too bad you couldn't make it - maybe next time. I would like to meet you after all the correspondence.

Keith, it is always good to meet another brother personally, and your work looks even better in person!

Mike, if I said I remembered your name, I would be a liar, but I do remember the conversation about fishing and air helmets! That is just the way my brain seems to work. I remember just about everything but names. Jilted for Richard Raffan, eh? I guess I will just have to get over it. ;-)

Gary, it was really special to meet Chris, and I had a lot of fun teasing him during the weekend. He has a lot of potential as a turner, and is getting a great head start. I will look forward to seeing some more of his work here in the future, as well as yours.

Anthony, if we had known the bus tour would have shown us so much, we could have skipped the boat! But then, we wouldn't have been on the bus. I told Don Orr that bus driver deserves a medal for taking care of us the way he did.

Steve, that thought has been in my mind. What an act to have to follow, eh? ;-)

Bill

Re: Symposium Report (LONG)

#11

Keith Tompkins

Re: Symposium Report (LONG)

Keith Tompkins

>HI Steve, I agree, it can be a draining experience...however: It is my belief that the demonstrator is obligated to do more that just a demo or two and leave with their check.

Many turners will never do a demo. They will never have their work critiqued, or appear in a book or magazine. But you will find them at every symposium, often doing work behind the scenes that is not fully appreciated. Without their efforts, these symposiums could not be possible. Meeting a well known turner, getting an autograph, or just shaking their hand and receiving a bit of encouragement can really make someone's day. It is an honor to be asked to be a demonstrator.

A demonstrator is, in my opinion, a representative of the AAW while at a symposium...they are not there for fun, in most cases they have applied to demonstrate, and are well paid for it. If they are too tired to mingle and interact with the crowd a bit, maybe they should reconsider the reason they are there in the first place.

The big-name turners can be compared to super-star athletes....many athletes will not sign an autograph for a kid unless he is paid for the priviledge! On the other hand, many can be seen in hospitals giving freely of their time to kids with little hope.(just one example)They build a lasting feeling of goodwill for themselves and their organization.

While I am on a rant, each demonstrator should also consider...WHY an I demonstrating? To boost my own ego? To show how great I am? I have seen too many of that type of demo in the past. The goal of a good demonstration should be to inspire and encourage those in the audience. Period.

I will give Andi a tremendous amount of credit for her efforts...and I bet she will be invited back!

Re: Symposium Report (LONG)

#12

Re: Symposium Report (LONG)

Don O.

>Thanks Bill for all the kind words of support and encouragement. Most people coming to an event like this have no idea how much blood, sweat, and tears and hard work goes into putting something like this together. It sure is nice to get positive feedback and ideas on how to make things better. This is only our third event and we know we didn't get everything right but we'll keep trying to get better.

It was a tremendous pleasure to make your aquaintance. Sorry about the bus ride but I did pass on the info about your driver's above-and-beyond attitude.

I sent the photo to Sightings, so we might see it on the Turning board soon.

I'm very happy your first Symposium experience was a good one.We all worked very hard to make everyone's experience a good one even though that's impossible. Sorry to hear about the thievery that happened. Glad I got mine when I did and am thrilled to have it signed in person. I wish I could have spent more time with every one especially you, but as one of the organizers, I had a lot going on all weekend. And add to that, I even managed to do my first real public demo and not injure myself or anyone else. On top of all that, my little stool got some praise during the critique! Whew, what a weekend! By the way, we'll try to work on arranging the presentations to meet your needs better next time! :~)

Thanks again and Happy Turning,

Don Orr

Re: Symposium Report (LONG)

#13

Re: Symposium Report (LONG)

Don O.

>Thanks Keith (he says blushing), it really means a lot to me to know you mean what you say. Probably my favorite comment on my demo came from your wife. You should ask her what she told me, it really touched me. It was a distinct pleasure to have you and Lisa and Steve sit in as you have been so helpful to me. Having Andi Wolfe and Al Hockenbery there was not too shabby either. Thanks for all your helpful info and your frienship. Your demo got a lot of people thinking as well. When the "pros" doing the gallery critique reiterate the importance of what you are trying to get people to think about, it must feel good.

Re: Symposium Report (LONG)

#14

Re: Symposium Report (LONG)

Don O.

>Thanks Gary, I appreciate your compliments. I very much enjoyed meeting you and your son. He is a nice young man who has a great turning teacher. Even though this event is a lot of work, it is a great pleasure to be able to provide this opportunity to other turners, to see their work and hopefully learn something as well.

We heard many good responses from many attendees and got some much-needed input and feedback as well. We can always do better, we're still pretty new at this. Glad to hear you had a good time and hope you will come back again.

Don

Re: Symposium Report (LONG)

#15

Keith Tompkins

Re: Symposium Report (LONG)

Keith Tompkins

>I got a signed one too!