Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

what would you use

Posts

what would you use

#1

what would you use

JR in south Louisiana

>I have been turning for about 3 years now and I am always looking for a challenge to test my skill level. One item I have always wished to try was a full size cowboy hat. It, to me, is one of the most "eye catching" peices you can turn. My question, can any wood be used? I would think a softer wood like Cypress would not work.

I am limited by the wood in my area. We have alot ofcypress, oak, pine, and I have access to mesquite. Which would be the best to use....thanks

Re: what would you use

#2

Re: what would you use *LINK*

John Lucas

>JR Your in for a challenge. They aren't as easy to turn as they look but aren't as bad either. The man to ask is Johannes Michelson who is known as the hat man.


http://www.woodhat.com/

Re: what would you use

#3

Re: what would you use

David

>"They aren't as easy to turn as they look"

I've been turning less than a year. To me they look like a manned mission to Mars!

Re: what would you use

#4

Re: what would you use

Randy Miller

>I saw Michelson turn a hat at the AAW symposium in R.I. a few years ago. He completed a full cowboy hat out of a rather large hunk of wet maple in less than an hour. The problem is, HE makes it look easy.... ;-)

He turns the hats wet and thin, then uses different jigs to shape the hats after they are turned. He has some interesting things to assist him, one of which was a lamp that fit through the headstock so he could have light from the inside of the hat to use as a guage on how thin the wood on the top/sides of the hat was getting when he reversed turned.

I believe he used to give classes, don't know if he still does...

-randy

Re: what would you use

#5

Re: what would you use

John Lucas

>David I've been turning a while and they are pretty tough. I've only turned one successful small one. Tried another one and cut through the side. One of these days I'll try a big one but I don't wear hats so it would only be a test of skill to be able to say I've done it. I think a new turner would be taking on a pretty big challenge. Patience and tenacity sometimes go a long way.

Re: what would you use

#6

Re: what would you use

JKJ in East TN

>Some how-to including wood selection:

Cowboy hat

http://www.turnedtreasures.com/project.html/hat.html

Wooden baseball cap

http://www.turnedtreasures.com/project.html/cap/cap_turning_pg1.html

Wood hat

http://home.vicnet.net.au/%7Epwguild/a-hat.htm

(these are from http://www.woodturningonline.com under Turning Projects)

JKJ

Re: what would you use

#7

Re: what would you use

WOODNUT358

>Michelsen came down to our Woodcraft store in RI for a three day turning class for hats.Three of our members took the class.It was around $600.00 for the three days,and each of them turned a hat.The biggest lesson they learned was the way he sharpened his tools.Most all of these professional turners grind their tools to suite their needs.All three agreed,it was worth every penny,especially the grinds they were taught.A couple of them went halves to build the jig to bend the hat,and each of them has turned a hat afterwards on their own.They all agreed,it was a great experience.