Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

Survey

Posts

Survey

#1

Survey

tdaniel

>A friend of mine is designing a voice activated switch to control power tools. If you want to stop your lathe you just say "Lathe, Stop" or whatever you program in to stop the lathe. I told him he should program it to stop when it "hears" "Oh, S@#%". What expression would you want it to recognize and stop the tool?

TD

Re: Survey

#2

Re: Survey

CapeMayMike

>"Holy crap Marie".........something similar, you'll have to use your imagination and it doesn't have to be shouted. If I had it, my shredded tee-shirt wouldn't be hanging in my shop right now, well, maybe just part of it.

Re: Survey

#3

Re: Survey

Ed Karch in No.VA

>MERDE ALORE!!

Re: Survey

#4

Re: Survey

Bob Hackett

>John Jordan once suggested that a good safety accessory would be a "sphincter switch".He felt the only problem would be finding an installer.

MB

Re: Survey

#5

Re: Survey

John Lucas

>Terry You named the one I want but if we have to keep it clean I think "Stop" would be good. I think computers should understand voice recognition. When I say OH S#%$ the computer should immediately cancel whatever I just did because obviously I didn't want to do that.

Re: Survey

#6

Do we have to keep it clean? :)

Carole in VA

>

Re: Survey

#7

Re: Survey

Dave MacLuskie

>Actually, most modern computers can. Macs have since OS 8 at least. Based on Microsoft's site, it's also built into XP.

Of course, they only sorta-work, and it ends up being faster just to use the keyboard most of the time.

I've been tempted to install a giant red push button labeled UNDO on more than one occasion though. I think ThinkGeek has something like that :)

Re: Survey

#8

Re: Survey

adrien

>merde alors s'il vous plait

Re: Survey

#9

Re: Survey

Fog Tanner

>I think you pretty much have it summed up, except I would leave off the "OH"...takes too long to say when something goes wrong. Believe me, when I fell of a mountain once when rock climbing, there was no Oh in front of S***. Same when stopping in a hurry.

One of my PC's ran OS/2 years ago before Mac or Wyndowz. It had voice recognition/commands as part of its interface. You could program what command you associated with a given word or phrase. The problem is having to speak clearly enough to for the software to distinguish between words. The other problem, was when I made an error and "vocialized my feelings", the thing would shutdown at a time when I didn't want it to. Which is a problem when you are programmer and spending long hours in front of the thing.

Re: Survey

#10

Re: Survey

GeeSeaWhy

>My Scottish accent tends to get more pronounced when I'm under stress so it probably doesn't matter too much what the word is so long as the system recognises that particular sound.

That said, I can see a couple of practical problems with the idea. I almost always wear a faceshield, which muffles my voice. Even more so if I'm using the Airshield. Then there's the occasion when the chuck starts coming loose and stopping the lathe will only make matters worse.

Graeme

Re: Survey

#11

Re: Survey

John Lucas

>Fog I used to do a lot of rock climbing. Usually when I fell it just happened so quickly I didn't say anything till it was over.

Re: Survey

#12

Re: creative ways to park your truck

Ned Bulken

>Once when I was younger, I had occasion to "host" a "creative ways to park your tractor-trailer" Seminar. The drive axles lost traction going about 45 mph when I was deadheading to a shipper, so empty trailer on a snowy and windy day. After I lost traction, and realized that things were beyond saving I found myself saying... "Oh Sh*rt, this is going to...** Screeching tires...... WHUMP** Hurt!"

net result, on heckuva set of skid marks, the tractor came to rest upright with the trailer pushing the stack into the back of the cab, I was shaken but not stirred, and amazingly not hurt too bad at all. My back ached a bit, but that was about it. I unbelted, jumped out of the cab and made sure the two cars next to me whom I had to swerve to miss when they basically stopped on the highway in front of me due to a whiteout that popped up suddenly. They wound up in the median, I was on the shoulder, everyone was fine, but I wound up getting out of trucking for quite awhile.

Oh, the real kicker to this story was that the trailer wound up stopped against a fence, where there were several 'volunteer' trees on the edge of the highway. Not planted, just young saplings growing where neither the DOT or the farmer had bothered to clear them out on the fence line. The state of OHIO actually had the gaul to send me an invoice for $500 for them. I refused to pay and said send it to my employer instead.

That I know of , they never did receive the $500.

Re: Survey

#13

Re: Do we have to keep it clean? :)

Ruth Niles

>Looks like you and I use the same word, Carole! : O

Re: Survey

#14

Dick Hines

Re: Survey

Dick Hines

>Terry I don't know about wood turning but OH S@#$%^!!! Is the most used term in volleyball.

Re: Survey

#15

Re: Do we have to keep it clean? :)

Barry Irby

>When my kids were little one of them got into trouble for saying S%^t in front of his mother. She scolded him, saying "you have been listening to your father!" He said, "No, Dad says D@mn, S%*t is Your word." I don't remember the punishment.

Re: Survey

#16

sooooo......what word do we use? :)

tdaniel

>

Re: Survey

#17

Re: sooooo......what word do we use? :)

David

>Well, mostly I'm seeing derivatives of shirt and sheet, but for me, I think the phrase that would get the most immediate response is my anxst response in the split second before I see total collapse, which would be "No! No! No (then this part as whatever it is rolls across the floor) nonononnonononononono...awwwwwwwww. Shert."

Re: Survey

#18

LOL!

tdaniel

>