Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

Chainsaw 101

Posts

Re: Chainsaw 101

#26

Re: Here's what I use, RJ

RJ

>Very cool!

Looks like it can hold the smaller pieces that would normally flip arround with chainsaw.

Next to get that clamp.

Thanks!

RJ

Re: Chainsaw 101

#27

Re: Chainsaw 101

RJ

>You see, here's another problem.

My bandsaw only has about 4" or 5" cutting depth. But I may like to have section of wood 12" long and 3x3" wide. The wood itself might only be 10" for example.

So I wind up needing to make lengthwise cuts of 12" piece of log. Hard to hold still with chainsaw going through.

But Gary's version which is stump with v notches and clamp would hold small log sections well enough to make those cuts.

Also if the holder was made of hardwood stump then it would last longer than 2"x4". I would think...

Thanks for your help.

RJ

Re: Chainsaw 101

#28

Re: Chainsaw 101

Guy

>Look around for a used pallet. Lots of grocery stores etc leave em by the dumpster. Ask and they usually don't have a problem if you want one or two. I just lay the pallet on the ground and the spaces between the slats hold the log just fine or if you want you can use clamps and the pallet gives you room for those. Keeps the log off the ground and your blade from hitting ground. Just check to make sure there aren't any nails in your blade's path. My pallet gets smaller everytime I use it so pretty soon I'll go hunting for another one. It's free simple to use and very expendable