Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

Dust collection Grizzly vs. Jet

Posts

Dust collection Grizzly vs. Jet

#1

Dust collection Grizzly vs. Jet

David

>In my continuing search for a dust collector, I've reduced my choices to a cannister filter variety, and found two that I "like" (If I had room and $, I would get a cyclone, but I don't think my wife wants me putting the motor through the floor of the family room).

Anybody own a Grizzly G0548 or a Jet DC-1100CK (aka 708626ck) and care to comment on them? Grizzly vs. Jet comments in general? Recommendations for a Separator to use in front of the collector?

I would greatly appreciate your comments. I have leanings toward one of the collectors, but will reserve comment so as to not taint the jury.

Thank you!!!!

Opening night in the NHL! won't be on the lathe tonight!!!!

David B.

Re: Dust collection Grizzly vs. Jet

#2

Dick Hines

Re: Dust collection Grizzly vs. Jet

Dick Hines

>About the only difference is the Griz will more than likely be a little bit cheaper. I have a 2 HP griz and have great survice for the last couple of years.

As far as a something to catch the chips in front of your collector you can use a 30 gal. plastic trash can.

Grizzly sells a top for the cans. You have to hook up a 4" hose between the can and the collector.