Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

a different blank drying question

Posts

a different blank drying question

#1

a different blank drying question

David

>I've got a handful of blanks in my basement that are anchor-sealed and drying. I've got them situated as best I can to allow airflow, but there isn't much airflow down there, so some of them have developed mold. So far none have cracked, but the mold concerns me for a few reasons:

1) A mild concern that mold will spread beyond the wood and I'll end up being one of those people with mold spore problems in the basement (so, first question would be should I have any concern about that?)

2) I'm quite sure I don't want to turn wood where the first thing I'm doing is knocking off mold and sending that airborne. I saw a post a while ago about cleaning the molds in chlorine or something? What do you do about this?

Thanks -

David B.

Re: a different blank drying question

#2

Re: a different blank drying question

Jim King

>David: You maybe saw my post. We use a heavy solution of swimming pool chlorine and water and dip the blanks for a few minetes and this virtually eliminates any mold. If you only have a few blanks let them dry and then set them on end on top of dry shavings and cover the top end with dry shavings and you should have no problems. They will dry slowly and a minimum will crack. No waxing necessary.

Re: a different blank drying question

#3

Re: a different blank drying question

CapeMayMike

>On occasion I get some mold on my blanks and other wood stored in the shop. I have a spray bottle of bleach and give them a spritz.....does the trick.

Re: a different blank drying question

#4

Re: a different blank drying question

David

>Thanks for the ideas, gents. I appreciate the help!

David B.