Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

Old Friend Snaps.. Part 2...

Posts

Old Friend Snaps.. Part 2...

#1

Old Friend Snaps.. Part 2...

Spence in Rhode Island

>Well as was suggested I wrote Sorby about the roughing gouge snapping at the tang. I just recieved a reply this morning and Sorby is replacing the gouge for free. Remember that I have used this gouge heavily for more than 15 years and the reason the tang snapped was not due to a fault with the tool. Sorby gets an A+ on customer service on this one! As I said in my reply to them that without a doubt my next tool purchase will be a Sorby.

Regards

Spence

Re: Old Friend Snaps.. Part 2...

#2

Re: Old Friend Snaps.. Part 2...

David

>I creamed a parting tool when I first started turning, confessed my sin to Sorby, and they replaced it, including shipping, from the UK. Kind of hard to argue with that.

Re: Old Friend Snaps.. Part 2...

#3

You got that right!

Spence in Rhode Island

>

Re: Old Friend Snaps.. Part 2...

#4

I was hoping that would work out...

JKJ in East TN

>I figured it wouldn't hurt to ask! Sure beats buying new steel.

Honda replaced an entire motorcycle engine for me once although it was way out of warrenty. It would never have happened if I didn't ask.

JKJ

Re: Old Friend Snaps.. Part 2...

#5

Now...

Bob Hackett

>Go see your friend the gunsmith and after he welds a new tang on turn it into a shear scraper ala Joaz.Opportunity knocks.

MB

Re: Old Friend Snaps.. Part 2...

#6

Re: Old Friend Snaps.. Part 2...

Norm Smith in Nova Scotia

>Me too. Sorby is a great company.

Norm

Re: Old Friend Snaps.. Part 2...

#7

Re: I was hoping that would work out...

Spence in Rhode Island

>Thanks for the idea John! Normally I would never think of doing that but am I ever glad I did take your advice. Honda replaced an engine..? Hhhmmmm... I have a 61 Harley with a blown tranny I can't afford to fix out in the garage. I wonder if Harley would.. nawww no way.. never happen!!! LOL I really do have to sell that bkie though as riding is no longer an option for me.. Anyway thanks again!

Spence

Re: Old Friend Snaps.. Part 2...

#8

Re: Now...

Spence in Rhode Island

>LOL You reading my mind Bob?? I already have a couple of gouges that I've turned into Joaz style shear scrappers but I'm sure that Rich will think of something cool to make out of the pieces from the roughing out gouge. Although he is still laughing at me for my idea of a 1 1/4" skew in Damascus steel with a mamouth ivory handle and 24kt gold ferrule. LOL That's the kind of materials he uses in his knives. $5,000 turning tools anyone? LOL

Spence

Re: Old Friend Snaps.. Part 2...

#9

Re: Old Friend Snaps.. Part 2...

Phil Joines Krum, Texas

>Some of the comercial spindle turners silver solder a rod to the tang and two or three inches up into the blade to reinforce them.