Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Bocce Ball Construction/Material/Specs

Posts

Bocce Ball Construction/Material/Specs

#1

Bocce Ball Construction/Material/Specs

Devon Palmer

>Salve!

Has anyone ever made Bocce balls? I'm thinking it'd be a great project/exercise. I've searched the net for contruction tips and materials, and regulation size/weight but, am coming up empty handed.

I'm guessing that it'd be best made out of dried/layered/laminated hardwood, but, am not sure if "regulation" balls need to be out of a specific species.

- Devon Palmer, Columbus, Ohio

Central Ohio Woodturners

Re: Bocce Ball Construction/Material/Specs

#2

Re: Bocce Ball Construction/Material/Specs

David

>Don't know if this will be of assistance or not, but I spotted this article a few days ago, and thought you might be interested.

FYI to anyone - the site below has lots and lots of project ideas & "how to" instructions for them.

http://www.woodturninglearn.net/bocce_balls.html

David B.

Re: Bocce Ball Construction/Material/Specs

#3

Re: Bocce Ball Construction/Material/Specs

Ed Kelle

>I have a set of wooden balls here, they are well over 60 years. With so much patina on them that I can't even tell what wood they are. What I can tell is that they seem to be a close grained wood, are fairly heavy and have stood up to the abuse of time fairly well. They get used regularly, and only have some slight cracking. Of course they have gone slightly out of round but to me, they roll better than the newer manufactured ones. Plus they have been in the family for ages so I am biased.

The balls are 4" diameter with one group of 4 having 2 tiny grooves at right angles so you can tell them apart. The small target ball is 2" diameter.

Good luck!