Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

Tormek

Posts

Re: Tormek

#26

I wish Lyn were here

Mike Schwing from Md.

>He'd have a thing or two say, better'n I could, about the Tormek.

I have been biting my tongue on this because I have a really bad migraine today and am not at my message composing best.

I own a Tormek. I also own a regular old grinder. I do my shaping on the grinder, and my sharpening on the Tormek. Sharpening my gouges on the tormek takes no longer than it does on the grinder - maybe not even 20 seconds of actual grinder wheel motion. But I have a lot of time invested in the setup of my jig(s). I think there are a lot of false impressions being given in this thread about how long it takes to do things on a Tormek, major shaping excepted.

For me there no more valuable tool in my shop than my Tormek. The leather honing wheel alone is worth the price of the Tormek. I not only sharpen my gouges on my Tormek, but my kitchen and other knives stay shaving sharp with little or no effort thanks to my Tormek. I am on my initial wheel after 3 years of use. It still has a couple of wheels left.

Truing and dressing the stone takes a few minutes at best if use a diamond credit sharpener. The same stone can be ground to coarse or fine grits easily.

If I want to grind with a burr I can. If I want to grind without one, no more difficult. If I use the stone properly, it wears evenly.

Would I buy another one? You bet your butt I would. Could I build my own equivalent more cheaply? Probably, but I'm lucky - money isn't scarce. What is scarce is time. I'd rather spend it turning than building a sharpener.

But I'd only buy another Tormek as long as I could have a regular old half speed grinder. I don't mind buying power tools.

Re: Tormek

#27

forgot to add

Mike Schwing from Md.

>My new MDI woodcarvers catalog has a new DIAMOND wheel that replaces the original Tormek stone. Says it never wears out (???), never goes out of true, sharpens way way faster than the stone, and can sharpen ceramic and carbide. $140. Offered in 3 grits, coarse, med, fine.

Re: Tormek

#28

Peter Charles Fagg (UK)

Ditto feelings about Tormek

Peter Charles Fagg (UK)

>

Re: Tormek

#29

Steven Antonucci

Why do some use speed arguements against Tormek?

steve antonucci

>Pardon my obvious question, but it seems that speed is a really poor judge of a sharpening system. I completely agree that the Tormek is not effect for reshaping tools (I use a belt sander), but for resharpening, it just can not be beaten.

Someone here has actually looked at surfaces onder a scanning electron microscope (forget who-sorry) and scientifically proven SHARPER. I will take sharper over faster any day. When I turn, I do it with the intent of producing the highest quality, not the most at the fastest. I sharpen often (when the hissing dulls), and I marvel at the surface I can achieve. Any extra time I spend sharpening on my SLOW Tormek is gained back twofold in the reduced amount of time I spend sanding.

No one argues that the Oneway isn't "better" than a Nova (Jet, Delta...), so I'm always baffled why people are so polarized in the discussion. You may not want a Tormek, think you need one, agree with it's costs, but it is a better sharpening tool than any other tool on the market- supported by scientific fact.

Steve

Re: Tormek

#30

Wears a groove

Jim Reed @ Tallahassee

>I am a Tormek fan who can't resist jumping in here. Whenever possible, move your tool across the wheel to even out the wear. Grinding down a groove in one spot is not the best technique for superior edges.

As for gouges, I prefer the Wolverine as it is quicker. I also think slow speed grinders are not necessary. Just put a good wheel on your high speed grinder and use the touch technique. High speed=faster.

Re: Tormek

#31

Re: forgot to add

John K Jordan

>>My new MDI woodcarvers catalog has a new

>DIAMOND wheel that replaces the original Tormek stone.

That has been available for some time. I thought about it but worried about one thing - if the machine tolerances are not perfect (and there is evidence they are not), you can dress the stone wheel until it is perfectly concentric. This would not be possible with the diamond wheel.

JKJ in East TN

Re: Tormek

#32

Re: Why do some use speed arguements against Torme

David Propst

>There was an article some years ago in the UK magazine which compared the edges of gouges off a dry grinder vs. a wet grinder. I used to have a reprint. The difference was quite impressive, both in edge durability and quality of cut. Steve Russell told me at at show once he was considering doing a comparison for an article. I do not know if he ever did.

That being said, I have seen David Ellsworth shear scrape to 200 smoothness with a gouge sharpened off on a grey low grit wheel. Hopefully I'll see him do it again this fall in class at Arrowmont (stealth gloat).

It pays to put your name on the waiting list...

David

Re: Tormek

#33

Re: forgot to add *LINK*

Stuart Johnson

>You might want to check the Yahoo Tormek usergroup for reviews prior to spending the buck for the diamond wheel.

O.T. Is there anything left that doesn't have a user group.


Tormek User Group

Re: Tormek

#34

Seeing a pro do it and doing it aren't equal :)

Stuart Johnson

>

Re: Tormek

#35

Re: Wears a groove

John Lucas

>Jim I'm not going to argue with you about high speed vs slow speed. Only that sharpening a gouge with the wolverine or by hand takes me exactly the same time with high or low. The only difference for me is the fact that it simply feels safer because the wheel is going slower. If the wheel were to explode at 1800 or 3400 you would still get the surprise of your life assuming you don't get hurt. That's why I don't tell anyone that you need a slow speed or you need a high speed grinder. To me it's simply a matter of slower speed feels less dangerous. It isn't really. It's kind of like when you put your first big bowl on the lathe and crank the speed up. It feels really scary next to the the 8 and 10 inch bowls that you turned before. Both could kill you if they explode it just feels less dangerous with the 10".

Re: Tormek

#36

Re: Tormek and Grinder

Bob R

>I am sort of new to turning but 50 + years to keeping and using carpentry tools. If they are not sharp "GRANDPA SAID I TOLD YOU TO SHARPEN THEM " There are 9 of us up here who are new wood turners and after one guy bought a Tomek system and we spent 3 days trying to get some good grinds, he sent it back.

We think we will try a Wolverine but am a little wary that it will be the same. We liked the promos on the Tomek but I guess we must be a little slow.

Cost was not a factor but 8 out of 9 should not be wrong. We had a lot of questions on the Tomek and the Wolverine just seems more adaptable.

Bob R West MacTurning

Re: Tormek

#37

Re: Ditto

Bob R

>That is the problem we found.............

Bob R WestMac Turning

Re: Tormek

#38

Re: Tormek - It's a nice $150 grinder

Bob Slocum

>

Re: Tormek

#39

Genius!

Peter Teubel

>Now why didn't *I* think of that?! I am DEFINITLY going to try it. I generally reserve my Tormek for everything EXCEPT turning tools, but this idea will leverage my experience with the jigs I have used for years. Grooving isn't an issue because I have a 2nd wheel specifically for my planer/jointer blades.

Thanks for the link, Brian!

Re: Tormek

#40

Credit Sharpener?

Peter Teubel

>"Truing and dressing the stone takes a few minutes at best if use a diamond credit sharpener."

=======================

Mike, can you explain how you do this? I bought a 2nd stone for my planer/jointer blades because I'd rather turn punky pine with a dull screwdriver than true up a stone with the Tormek truing jig. To me, its a major P.I.T.A.!!

Re: Tormek

#41

Re: Tormek

woodspinner/ Bill Hale

>For all the pro and con I love mine.

Now after almost 4 years I need a new stone. Where is the best price for the Tormec stone.

Bill in Casa Grande, AZ.