Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

weekend plans

Posts

Re: weekend plans

#26

Re: weekend plans

Jim King

>Tomorrow I am leaving early to catch some piranah and peacock bass. The rivers are down now and the fishing is good. Back tomorrow night and will have peacock bass made into ceviche and piranha in beer batter. Plus ice cold beer. Not to make you feel worse but the temperature here in the upper Amazon has been in the upper 60´s to 80.

Re: weekend plans

#27

Re: weekend plans

Ed Thomas, Leaside (Toronto) Ontario

>Started a balustrade installation on Thursday. The house is 120 years old, downtown townhouse, and the staircase reno to the 3rd has to match the lower 2 floors. This all began with the contractor, knowing I'm a turner, asking if I could "match the spindles" ... then, "can you made the newel for us"(winder staircase with the newel straddling the stringer at the 3rd tread makes for a 80" post) ... then, "what about the shoe, spacers, rail, etc. I should have stopped saying yes when they asked if I could install it. ;-)

If the rail hadn't been an inch short I'da finished it Friday afternoon. Yesterday morning was off to the mill for rail material, on the way to my sister's for my 52nd BD party (BD was Thursday). With what's left of this morning I'll machine the rail and finish the install this afternoon.

Ed


img

Re: weekend plans

#28

Re: weekend plans

Mike Brazeau

>Hey Ed.

How about telling us more about your lathe. Looks like quite a size!

Mike

Re: weekend plans

#29

Re: weekend plans

Gary Evans Tallassee, TN

>Hi John,

I think you'll be pleased with the 8,000 Btu's. We just put one that size in the window of the bedroom.

I was also concerned because our room is in the loft which opens into the main part of the house, so it's not an enclosed space. Turns out we have to set the thermostat higher than I expected to keep things from getting too cold at night.

By the way, my weekend woodwork is consisting of tearing out the rotten part of the bathroom floor. Great fun! 8^]

Gary

Re: weekend plans

#30

Re: weekend plans

Bill Crommett

>Ed: What is it with that steady rest with the roller wheels pointing away from the work-piece ? Do you have some sort of a bearing arrangement on the collar of the workpiece ?

Re: weekend plans

#31

Re: Steady Rest

Ed Thomas, Leaside (Toronto) Ontario

>Hi Bill,

Good catch there. The plywood collar has a groove that fits the bearings. I built the steady long before I found WC and learned about roller blade wheels, which are too soft for this purpose. I flipped the arms to steady the spindles which require a softer touch.

Ed, who's off to the install and will answer Mike's question this evening.


img

Re: weekend plans

#32

Re: weekend plans

john Lucas

>Gary I feel your pain. I moved into ahouse years ago and took a few days off from work to repair the shower wall the leak in the comode. I called my boss back and asked for the whole weak off. The floor and one wall had to be replaced.

Re: weekend plans

#33

Re: weekend plans

Gary Evans Tallassee, TN

>John,

The problem is that I can't complain about someone else's shoddy construction practices. I built this myself a number of years ago before I learned about the proper way to waterproof a shower.

I guess it's called paying for your mistakes.

Gary

Re: weekend plans

#34

Re: weekend plans

Stuart Johnson

>My shower work started out by a simple "honey look how this paint is flacking". Like a fool I looked and poked a bit. By the time I was done the walls had to be replaced and a complete termite treatment done. The shower pan was leaking. After getting a couple estimates I replaced it myself. Talk about a learning experiance. I don't think I'll ever be happy with the end result but I'm also not ready to start over. I do know if I had paid half of what the pro's wanted I would not have accepted it. My wife thinks it is great but I can see every uneven grout line or where a tile sticks up a bit instead of being nice and flat. Just the same as seeing every little flaw the bowl everyone else is gushing over.

Re: weekend plans

#35

Been there !

Fred in NC

>Replaced the wall around the tub/shower. While I was at it, tiled around the tub all the way to 2" below the ceiling. It was my first tile job, and it came out very nice.

Those recessed soap dishes can leak inside the wall. No more, I put a surface mounted one this time.

Re: weekend plans

#36

Re: weekend plans

Ed Thomas, Leaside (Toronto) Ontario

>Hi Mike,

If you're the Mike Brazeau from GHWG you may have seen this lathe on CWW forum. Jim Shaver, Jean Lefebvre and I used it to "slip roll" our Pentz cyclone cylinders and cones. At that time it was mounted on a pair of 10 ft, 4in u-channel with a wood/steel extension bed and lived in the back of the print shop, now closed. Last summer, after work, I was havin' a brewsky with the guys at the furniture shop and happened to see a 20 ft 4 in i-beam hanging 12 ft in the air. We guessed it was for a prior tenant's unloading device, they gave it to me and I used it to make a new sub-bed.

As it sits now, the CT lathe(175lb) and bed extension(50lb) are clamped to the sub-bed(guessing 150lb) and all are on a 10' x 15" bowling alley bench(300lb). The lathe can easily be repositioned on the sub-bed and I made a small bed extension for the outboard side (swing 20"). Of course it's underpowered and too fast, so when I need to slow things down I jack-shaft a secondary motor off the back of the main which brings the RPMs down and torque up(1.5:7 ratio), and maintains the functionality of the Reeves drive.

Next stage of the project is to build a truck to run on the bottom of the sub-bed. This will be for mounting a duplicating device.

Ed, tinkering in Leaside. :-)


img