Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

weekend plans

Posts

weekend plans

#1

weekend plans

john lucas

>For those of us left behind what are you doing this weekend. I'm going to install a small airconditioner in my shop. It's just simply too hot and humid to work. After that I'm going to turn a hand mirror and two thin wall goblets that will get pierced. of course I've got mow the yard, paint a cabinet, apply some finish to two shelves, and get a bike ride in somehow during all that. Therefore I need t get off hear and get my butt to work. Check back in at lunch. Hope to have the air in, mirror turned, and goblet started by then. (notice I'm putting the yard mowing off until tomorrow)

Re: weekend plans

#2

Re: weekend plans

Spence in Rhode Island

>Hi John, working on a series of boxes in cherry and ash at the moment. Since the shop is in the basement it stays nice and cool. :) Happily yard work is not on the allowed list so thats not a worry here.

An interesting note on the cherry is that it has been air dried for almost 100 years. Turns really nice and has a fantastic color.

Wish I was in KC for the weekend though. ;)

Regards

Spence

Re: weekend plans

#3

Re: weekend plans

Ron In Drums PA

>I don't know. First time in a long time there is no humidity. Might go picking blueberries with my daughters.

Right now I'm sitting on my back porch with my laptop, drinking a cup of coffee, thinking life is good.

Re: weekend plans

#4

Re: weekend plans

Barry Turner

>A "small" air conditioner? Maybe a medium-sized one would be better, unless it's a lot cooler in TN than in KY this morning.

Re: weekend plans

#5

Re: weekend plans

Barry Turner

>If you're sort on humidity.........we've got plenty to spare in KY. I could send you some.........no charge.

Re: weekend plans

#6

Re: weekend plans

Bruce in Saint John N.B. Canada

>John, what do you plan on doing in your spare time to-day? You make one tired just thinking of all those jobs, enjoy the weekend. By the way is there some place where a fellow can get a look at these mirrors that you turn, I have heard you metion them before. I don't believe I have ever seen a turned mirror in this part of the country.

Regards, Bruce

Re: weekend plans

#7

Re: weekend plans

Paul Londo

>Packing! I have to fit 2 canvas tents, 18th century camping equipment, my shaving horse, 2 tool boxes, 3-4 blanks for carving out carrying yokes out of, clothes and coolers in my van and leave sunday morning to Ontonagon Michigan. The 2005 Mideest National Rendezvous is July 29 - August 6 is up there and I'm part of the staff and have to get there early to help set up. On top of all the other stuff in my van I have to put in 4 4X4 sheets of dowboard for cannon targets, I'm artillery captain for the event and we are having a cannon shoot. I hope I get some time to do some carving. I f you would like to check out our camp site go to www.mwpr2005.com

Re: weekend plans

#8

Re: weekend plans

Paul Londo

>That should say "Midwest" National Rendezvous!

Re: weekend plans

#9

Re: weekend plans

Eduardo Sarmiento Hall-Lima Peru

>well this weekend will turn my arms out with a load of copaiba that got for free from the lumber yard 16 pieces of 12x12x6! a lot of wood good for at least 6 months,rigth now Im turning some vessels,shallow bowls,boxes etc some of this wood have some nasty cracks so no 12x12" vases or vessels but is a lot of fun next week is national holidays(whole week )so nothing to do but turn my life awayyyyy

Re: weekend plans

#10

Re: weekend plans

Sean Troy

>No turning today. I,m throwing my wife a surprise birthday party. I'll be out on grill duty most of the day..

Re: weekend plans

#11

Re: weekend plans

Phil Powell

>We live on a lake in N. Wi. so I think fishing is on the agenda today.

What's going on in Kansas City anyway??

Re: weekend plans

#12

Re: weekend plans

Norm Smith

>Hi John,

I agree with Bruce, I get tired just reading your post. I too, have heard you mention your mirrors before and would love to see some pics. of them and the how to`s??? It`s pretty hot here in Nova Scotia today so no turning.

Norm

Re: weekend plans

#13

Re: weekend plans

John K Jordan

>>A "small" air conditioner? Maybe a medium-sized one

>would be better, unless it's a lot cooler in TN

>than in KY this morning.

Ha! The news this morning advised people to stay inside today if possible.

Actually, I think a small AC unit can be useful even if it's too small to properly cool the shop. In my last shop I put a cheap one in front of me just over the lathe. The cool air blowing directly at me made working at the lathe comfortable although the rest of the shop was hot.

JKJ in East TN

Re: weekend plans

#14

Re: weekend plans

john lucas

>Spence What a coincidence. I turned my mirror out of cherry that was sitting in a barn for almost 100 years.

Re: weekend plans

#15

Re: weekend plans

john lucas

>John

This one is 8000 btu. I know it's too small but if it will take out some of the humidity and cool the shop down a few degrees it will make it tolerable. Lowes had the 8000 btu unit on sale for $79. It was cheaper than some lower btu models.

Re: weekend plans

#16

Re: weekend plans *LINK*

john lucas

>Bruce Idon't have a website but here are some photos from the TACA website.


http://www.finecrafts.org/John%20Lucas/John.htm

Re: weekend plans

#17

Re: weekend plans

john lucas

>Paul That sounds like fun. Wish I was there with my camera.

Re: weekend plans

#18

Re: weekend plans

john lucas

>Check up above. I posted some photos from another website. If you need instructions just e-mail me. I have some copies of handouts i can send you buy snail mail. I will be teaching these at the Tennessee Association annual symposium next month in Nashville. John

Re: weekend plans

#19

Re: weekend plans

Jim Shaver - Oakville, Ontario

>Hi John,

With the humidity down I have been in the shop since 9AM working on a furniture piece, But have to get back out there, I am hoping to have it all dry fit by tomorrow night ready for some glue by mid week.

Take care,

Jim

Re: weekend plans

#20

Re: weekend plans

Ron In Drums PA

>Just the look of those two images prompts me to say, You need a website.

Re: weekend plans

#21

No turning - no woodwork

Fred in NC

>Spent part of today working with metal. Low banjo to hold a table to use with a Dremel or router. This is for fluting and drilling small pieces. Ah, and of course, a proper holder for the Dremel so it can slide on the table. Also worked on design for the Rose Engine spindle....

Wood will come later in the week.

Happy weekend friends !!!

Re: weekend plans

#22

Re: No turning - no woodwork

john lucas

>Fred

I want to see the rose engine when you get it going. I've been thinking about that for years it's just way on the back burner of things I need to get done.

Re: weekend plans

#23

Re: weekend plans

Paul Londo

>Maybe If I ever figure out my digital camera I can post some pictures when I come back in 2 weeks!

Re: weekend plans

#24

Rose Engine

Fred in NC

>John, I am planning to post progress pics.

Re: weekend plans

#25

Dick Hines

Re: weekend plans

Dick Hines

>Finished a gum bowl and started return a ambrosia bowl. Got hot in shop so I fired up the big bike and took a ride down to Yorktown Va. Still hot but at 60 MPH the air feels cooler. Think it's just in my head though.

I need to work with my new coreing system tomorrow. I have 200 lbs of big leaf maple burl I want to get all the bowls out of I can.