We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
>Posted this on " Looking for Something" but didn't get much response, so here goes again! Just started wood turning and would like to get your scrap turning wood to practice with for the price of shipping. So if you have useable scrap laying around and have no use for it, please give me a shout! Thanks for your time and consideration. John- Grand Marais, Minnesota
>No trees in Minnesota? Have you tried calling on your local tree removal/arborist service? Most of the stuff they cut is chipped or dumped. I've found them to be most willing to help a guy out. Sometimes a case of beer dropped off to the guys helps grease the skids, sooner or later they have your wish lists and call you when they find something.
Apologies if you have some other purpose in mind, but my scrap wood is rarely worth sending to anyone, (and Jennifer gets what is worth sending) gotta be better stuff lying around your town destined for the chipper.
>John: Walk over the hill to the beach on Lake Superior and pick up a couple ton of driftwood knots and roots and make everyone jealous with your turnings.
>John All my early turnings were stacked glue ups or segmented work. I came to the turning world from the flat side so I already had a table saw. Then I bought a wood cutting bow saw and started cutting small longs to shape. It ws hard work but I made a lot of things with this green wood. You can find wood everywhere if you look. The hardest part is reducing it to a size that will fit the lathe. A chain saw is really handy and greatly improves your chances of getting good woood to turn.
>John -- Last time my wife and I stayed a few days in Bluefin Bay, I found a firewood operation just west of Lake Superior where a woman was splitting freshly cut birch with a power wood splitter. I paid a dollar for a 16-inch log that was about 14 inches in diameter. There should be no shortage of downed trees in your area but you'll want to check with the landowners before you take any. If you lack a chain saw or bandsaw for preparing your own blanks, I'd check with the local firewood operations for getting your stock cheap. They might even be willing to cut it to your specifications.
>OK, I agree with all the comments and suggestions for gathering free or next to free wood, but I do have a question for John.
Not trying to pry into your personel life, but is there a finacial or physical reason you can not find and gather your own wood? If so some of the suggestions given here may change to a different tune.
>I'll offer a response for that, as a still new turner. Once you buy the lathe, and get some tools, you still lack experience. You have no idea what types of wood are good for anything (and you learn later that "anything goes"), you don't know whether to use green or dry, you don't know how to prepare a blank, and you don't know where to get practice pieces to work on because all you have in your basement is 2x4's and nobody posts pictures of 2x4's they turned. So you just don't know what to do. I joined a turning club right away (because I knew somebody who was already a turner), got invites to a couple of people's houses to show me the ropes, and these people also set me up with practice pieces - leftover tool handles, scrap pieces for spindle practice, etc. It doesn't take long before you have more wood than you can deal with, but to start with you just look in your basement and don't know what to do.
>>but to start with you just look in your basement
>and don't know what to do
I think a great place to start is one or more of the great books available, for example the intro book by Raffan or Darlow. (I personally am a book-o-holic and buy/read nearly everything I can find.)