Home Articles Forums Gallery Marketplace Videos
New here? How did you find us?

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Gleanings from last Wed night chat

Posts

Gleanings from last Wed night chat

#1

Gleanings from last Wed night chat

tdaniel

>Some of the things mentioned during the chat last Wed night are worth repeating:

1. Not only read tHe safety manual that comes with the saw....study it.

2. The log on the ground is still very dangerous. Larger logs can roll, trapping your legs or worse.

3. Measure the distance from to the mid point of 3 cutting links. Anything smaller than this dimension can cause kick-back. As long as 2 links are engaged in the cut the bar won't bounce but when only one tooth tries to cut severe kickback can occur. This is more likely to occur on skip-toothed chains but can occur on any. The anti-kickback chain reduces this possibility.

4. Dull chains are dangerous; keep them sharp.

5. Not mentioned in the chat but be especially careful when dropping a tree with even the slightest breeze blowing.

6> Read the safety manual!

Please add to this list anything you feel would be helpful.

TD

Re: Gleanings from last Wed night chat

#2

Re: Gleanings from last Wed night chat

Andy Halterman: Vacacion en tres dias!!

>Well, I didn't participate or even listen in on the chat, but I'll offer this.

I have an older Stilh 041 Farm Boss. This thing was made before the days of blade brakes and it has very little plastic on it. It is both a heavy and a heavy duty saw. I have a 16" bar on it now and it will mow through oak, locust, or hickory with little effort with a good chain. That saw will wear you out much quicker than a light saw. Now, onto my point. When I start to fatigue, it's time to quit. Just like in the shop. When one isn't all there, one is sloppy, then one is in the hospital with doctors trying to figure out how to fix/reattach bits better left unsawn.

If it ain't your day, walk away. Don't push your luck. She's a fickle lady and will leave you with no advance notice.

Mis dos pesos.

Andy Halterman

Looking at a smaller lighter Stihl saw for the less heavy duty cutting in Hendersonville, NC�

Re: Gleanings from last Wed night chat

#3

Re: Gleanings from last Wed night chat

bill Crommett in seneca

>Another felling warning: Be caerfull that the tree doesn't land on a hump or large rock that would act like a fulcrum and toss the butt up in the air, because it might come back down on you. I was lucky that time.

Re: Gleanings from last Wed night chat

#4

Re: Gleanings from last Wed night chat

Jorge Castaneda ~ Downeast Maine

>Hola Andres!

Yo tengo una Husqvarna 353 y la recomiendo, es una sierra dulce, dulce y solo pesa 13 libras.

Mirala!

mis dos centavos : )

Jorge

Re: Gleanings from last Wed night chat

#5

Yep, Huskies are sweet machines.

tdaniel

>

Re: Gleanings from last Wed night chat

#6

But POO-lans are better...

BubbaBob

>

Re: Gleanings from last Wed night chat

#7

Now Bubba....

tdaniel

>Polands aren't better, they just last longer. You can put one on back of the truck and park it all day in Atlanta and no one will still it; try that with a Huskie!

× Share

Share on

✉ Email this page