Tool Storage
Dick Hines
>There was some post on Wed. showing tool storage. Here is mine. The 2" PVC pipe is dry wall screwed to a piece of playwood that is screwed to the framing in the shop. Some day I will get it insulated. I cut the pipe to size and drilled holes for the dry wall screws. The top screwas are only in the back of the pipe and the bottom screws are all the way thriugh, it keeps the tools from falling to the floor. The pipe is open on the bottom so shavings do fall to the floor.
I turn at the end of the lathe so the tools are easy to get to and I don't have to reach over the work.
