Spring Issue of American Woodturner Magazine

3/10/05, 2:03 AM #1

Jennifer@Indy.USA
Member
Offline
4,681 posts

Registered: 1/5/04

Spring Issue of American Woodturner Magazine

Jennifer@Indy.USA

>Has everybody but me received their Spring issue?

Even members north of the border have theirs. I sent AAW a note to see if there's a mix up....or maybe I'm just being impatient.

: (

- - -

Hello Everybody! I figure I've been hanging around WoodCentral for a few years now so I might as well officially post a Bio. I'm Jennifer and I reside in the heart of the Midwest in Indianapolis. You'll usually find me hanging out on the turning side of WoodCentral, but I check the Main forum too. I started woodworking about 25 years ago mostly interested in flatwork; small furniture and other items to use around the home. Then I discovered the lathe and became obsessed with it. I've been turning for about 23 years now. My love and excitement for turning has taken me into the world of teaching and frequent demonstrating. Lots of experimenting with textures, color, burning over the past several years. I've recently begun dabbling in metal clay work and have started incorporating it in to my turnings too. It's another toolbox full of toys! When I'm not turning, I'm hanging out with the love of my life and most honest critic, my husband Clay. In order to keep the lathe spinning and the lights on I spend the other part of my day at an ABC television station directing the evening newscasts.

Re: Spring Issue of American Woodturner Magazine

3/10/05, 2:12 AM #2

Jim Shaver Oakville, Ont.
Guest

Canadian Version Arrived Yesterday

Jim Shaver Oakville, Ont.

>Hi Jen,

Mine came yesterday, complete with Canadian pricing in the ad's and even proper Canadian spelling, oh....that was the Canadian Tire flyer......!!!

Still wishing I would get my magazines before the forums had talked all the articles through!!

take care,

Jim

Re: Spring Issue of American Woodturner Magazine

3/10/05, 2:13 AM #3

Jennifer@Indy.USA
Member
Offline
4,681 posts

Registered: 1/5/04

Re: Canadian Version Arrived Yesterday

Jennifer@Indy.USA

>Yea, me too....I won't even need to read the one about copying other people's work!That's been hashed to death.

Oh well....I can look at the pictures :)

- - -

Hello Everybody! I figure I've been hanging around WoodCentral for a few years now so I might as well officially post a Bio. I'm Jennifer and I reside in the heart of the Midwest in Indianapolis. You'll usually find me hanging out on the turning side of WoodCentral, but I check the Main forum too. I started woodworking about 25 years ago mostly interested in flatwork; small furniture and other items to use around the home. Then I discovered the lathe and became obsessed with it. I've been turning for about 23 years now. My love and excitement for turning has taken me into the world of teaching and frequent demonstrating. Lots of experimenting with textures, color, burning over the past several years. I've recently begun dabbling in metal clay work and have started incorporating it in to my turnings too. It's another toolbox full of toys! When I'm not turning, I'm hanging out with the love of my life and most honest critic, my husband Clay. In order to keep the lathe spinning and the lights on I spend the other part of my day at an ABC television station directing the evening newscasts.

Re: Spring Issue of American Woodturner Magazine

3/10/05, 2:27 AM #4

Jerry Whitaker
Guest

Re: Spring Issue of American Woodturner Magazine

Jerry Whitaker

>Got mine last Friday. They send them out in batches and usually I am the last one. Maybe they started with the W's this time.

Re: Spring Issue of American Woodturner Magazine

3/10/05, 2:53 AM #5

john lucas
Member
Offline
20,176 posts

Registered: 1/1/04

Re: Spring Issue of American Woodturner Magazine

John Lucas

>Jennifer

I just got mine a few days ago. There is a thread on this on the AAW message board. Phil explained that they have to send the mag 2nd class and after it leaves there hands it's up the the USPS and apparently there delivery really is not timely.

He said 1st class postage was just cost prohibitive. They are still looking into the problem to see if there are any solutions. If you or anyone else knows of a good way around this I'm sure he would love the hear from you.

Re: Spring Issue of American Woodturner Magazine

3/10/05, 7:10 AM #6

RonZ
Guest

Re: Spring Issue of American Woodturner Magazine

RonZ

>Don't feel bad, I didn't get mine yet. =o)

Re: Spring Issue of American Woodturner Magazine

3/10/05, 11:54 AM #7

Ronny Eelen
Guest

Re: I got mine yesterday and I live in...

Ronny Eelen

>... Belgium, Europe, across the ocean...

Re: Spring Issue of American Woodturner Magazine

3/10/05, 3:22 PM #8

Bruce McElhaney Spring Lake, MI
Guest

Re: Spring Issue of American Woodturner Magazine

Bruce McElhaney Spring Lake, MI

>Still waiting for mine. But I'm in Michigan . . .

Re: Spring Issue of American Woodturner Magazine

3/11/05, 1:40 AM #9

Jennifer@Indy.USA
Member
Offline
4,681 posts

Registered: 1/5/04

Re: Spring Issue of American Woodturner Magazine

Jennifer@Indy.USA

>Thanks Everybody....I'll just have to be more patient :)

- - -

Hello Everybody! I figure I've been hanging around WoodCentral for a few years now so I might as well officially post a Bio. I'm Jennifer and I reside in the heart of the Midwest in Indianapolis. You'll usually find me hanging out on the turning side of WoodCentral, but I check the Main forum too. I started woodworking about 25 years ago mostly interested in flatwork; small furniture and other items to use around the home. Then I discovered the lathe and became obsessed with it. I've been turning for about 23 years now. My love and excitement for turning has taken me into the world of teaching and frequent demonstrating. Lots of experimenting with textures, color, burning over the past several years. I've recently begun dabbling in metal clay work and have started incorporating it in to my turnings too. It's another toolbox full of toys! When I'm not turning, I'm hanging out with the love of my life and most honest critic, my husband Clay. In order to keep the lathe spinning and the lights on I spend the other part of my day at an ABC television station directing the evening newscasts.

Re: Spring Issue of American Woodturner Magazine

3/12/05, 3:37 AM #10

Mike Brazeau
Member
Offline
768 posts

Registered: 1/1/04

Arrived today Friday 11th

Mike Brazeau

>Mine was in the mail today. Unfortunately it arrived somewhat tattered for the first time. I hate extra plastic bags but they do work. FWW always arrives nice and crisp.

Mike

Spring Issue of American Woodturner Magazine

Posts