Knowledge You Can Build On — Est. 1998
Maple Natural Edge Bowl
Jerry-Huntsville,AL
>I found this site several months ago and have been enjoying the pictures and very helpful information that regularly appears on this site. I am finally ready to post with a picture of a bowl that has been sitting on the bench for a while waiting for a finish. Finally finished it today. It was turned wet and I had trouble sanding it off the lathe when dry. It is maple, about 4hx6w, and finished with Danish Oil followed by Beal wax system.
Re: Maple Natural Edge Bowl
Jerry-Huntsville,AL
>Here is another shot of the bottom.
Re: Maple Natural Edge Bowl
Keith Tompkins
>Lookin' good, Jerry! Wecome aboard!
Re: Maple Natural Edge Bowl
Mike Rubes, Apex, NC
>Hi Jerry,
Very nice! I love the clean form of the bowl and how it contrasts with the natural edge, very nicely done. Looks like you were able to keep the full bark on as well, I think that helps the "rustic" look of the bowl, but mine seem to come off more often than not :)
Thanks for the post and now that you've posted one bowl, surely there must be more to come!!
Mike
Love the posts with pics in Apex, NC!
Re: Maple Natural Edge Bowl
Jerry-Huntsville,AL
>Thanks for the nice comments Mike. I am finishing up another natural edge shallow bowl. Will post it soon.
