Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

Female turners...need opinions!

Posts

Female turners...need opinions!

#1

Female turners...need opinions!

Carole in VA

>Do any of you use the Trend Airshield or similar product? I cannot find a face mask or respirator that fits me right and I am wondering if any of you gals find the powered ones comfortable? This dust is killing me.

Re: Female turners...need opinions!

#2

Trend user

Jennifer@Indy.USA

>Hi Carole,

I just bought the TREND about a month or so ago and really like it. It is a little bit heavier than the standard face shield but you get use to it. The first couple of weeks I did notice some soreness in the muscles in the back of my neck, but no longer. It's really comfortable and unobtrusive. A bit pricey, but that's just the cost of not breathing bad stuff I suppose. It is such a great relief not to be breathing the dust that I was. Especially in the winter when I have the shop door closed and no fans blowing the air out the big door. The dust collector and JDS Air cleaner just don't cut it.

Jennifer

Re: Female turners...need opinions!

#3

While not a female...

John Cotten

>I do own and use a Trend

airshield. Love it. It fits well, and does a great job with the dust problem.

Re: Female turners...need opinions!

#4

Re: Female turners...need opinions!

Ruth in S.Cal

>I used to use teh Record from the UK. It fits my face fine but the weight of the battery at the top of my head, and the headband gave ne headaches and back ache. The ratchets never grabbed unless I tightened them very tight. I couldn't stand it. Now I use the kind of goggles that are the similar style to glasses, but they have the foam around them so they are dust 'proof'. I also use the N95 face masks. I think it I had a stronger back or neck the Record would be great.

Re: Female turners...need opinions!

#5

Re: Female turners...need opinions!

Barbara Gill, Remlik VA

>I use a North (7700 series I think) facemask. I have used the same type in the sawmill for almost 20 years now. When I need a mask for turning, I use the same. The fit is good and everything is replaceable. You can get the mask at Grangers.

Re: Female turners...need opinions!

#6

Carole - it goes on your HEAD

Mike Schwing from Md.

>

Re: Female turners...need opinions!

#7

Re: Female turners...need opinions!

AndiWolfe

>I use the trend airshield. However, I find the weight to be somewhat of a problem after an hour's time if I wear it continuously during a session, so usually wear it just during the sanding phase. It's fine for short periods, but I wouldn't want to wear it all day long.

I switched over to the size S Dust be gone mask a few months ago and find that it fits me the best of all the nuisance dust masks. This is the one that has blue straps and it's supposed to be for children. This mask combined with good dust extraction works well for me, and I use it most of thetime.

Re: Female turners...need opinions!

#8

Well, I wasn't planning to SIT on it Mark! :-)

Carole in VA

>Although if it is heavy, and noisy and uncomfortable, I might end up doing that. LOL

Re: Female turners...need opinions!

#9

Slight Hijack: Fathead Turners?

Don Thompson - Cutler Ridge, Florida

>Has anyone reading this who wears a very large hat size had success using something like the Trend? I am talking about size 8-1/4.

One size sometimes does not fit all. :-(

Re: Female turners...need opinions!

#10

Re: Female turners...need opinions!

JanManuel

>I used a Dustfoe mask for about 15 yrs...poor thing is just worn out...so I got a Dust-be-gone mask. It works ok, but I sweat bad under it. Thankfully, I can work with shop doors/windows open 2/3 of the year here in east TN, and that combined with a big fan keeps the dust levels down pretty good when I'm turning.

I've never used a face mask, but then I don't do bowls, either. I wear my regular glasses. I get glass lenses...cause superglue won't stick to glass.

Re: Female turners...need opinions!

#11

3M 6000 full face mask *LINK*

Phil Joines Krum, Texas

>LOML has a metal plate in her haed from an injury and can't where a band type hard hat of face shield. She likes the 3M 6000 resporator. It has a soft plastic gasket thingy (tech term) that seals to the face and a 5 point harness for support. There are thin plastic overlays available to keep krud off the clear thingy (there it is again) and cartriges for just about any kind of nasty breathable stuf. It comes in several sizes and there are other accessories available for it. We get this kind of thing from Gemplers.


3M 6000

Re: Female turners...need opinions!

#12

Re: 3M 6000 full face mask

Barbara Gill, Remlik VA

>That is not unlike the North half face mask that I use.

Re: Female turners...need opinions!

#13

Re: Slight Hijack: Fathead Turners?

john Lucas

>Don

I have the opposite problem. I have a very small head. Most hats and shields are adjusted to the smallest hole and sometimes still won't fit.