Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

Making your own Wolverine and Vari-Grind Jigs?

Posts

Making your own Wolverine and Vari-Grind Jigs?

#1

Making your own Wolverine and Vari-Grind Jigs?

Ryan Dicker

>Hi,

I know that Oneway is a sponsor of Woodcentral and that they make excellent products. However, if you are 15 and don't have the $130 to shell out for the 2 jigs, you have to come up with some cheaper ways around things.

I was wondering if anyone had built their own or would be willing to take a few close up pics of both the jigs to aid in constructing them. I'm not conserned as much with the wolverine construction but more the vari-grind. A few pics of the vari-grind with a tape measure beside would help determining the approximate dimensions.

Thanks in advance!

Ryan In Renfrew Ontario

Re: Making your own Wolverine and Vari-Grind Jigs?

#2

Re: Making your own Wolverine and Vari-Grind Jigs? *LINK*

Garrett in Victoria

>Hi Ryan

You can get detailed PDF drawings for the Wolverine-style jig and versions of both a short and long Vari-grind from Jean Michel for the asking.

Isn't WoodCentral great? This is a three-way Canadian parlay, Ontario to British Columbia to Quebec!

If Jean Michel's jig is too complicated for you - or the parts too expensive - send me an e-mail and I'll give you instructions and photos for one you can build with scraps. Not so refined nor pretty but just as effective. (I'm leaving on a long trip to Arizona and California early Thursday so if you're in a rush get back to me fast.)

Cheers, Garrett


Jean Michel

Re: Making your own Wolverine and Vari-Grind Jigs?

#3

Leo Van Der Loo

Re: Making your own Wolverine and Vari-Grind Jigs? *LINK*

Leo Van Der Loo

>Hi Ryan

Darrell Feltmate has plans for the grinding jigs and a lot of other good ideas, it's have to visit site for wood turners.

Have fun and take care

Leo V


http://aroundthewoods.com

Re: Making your own Wolverine and Vari-Grind Jigs?

#4

Keith Tompkins

Re: Making your own Wolverine and Vari-Grind Jigs?

Keith Tompkins

>Hi Ryan, I made my own with a 3/4" diameter steel rod, and welded up an adjustable holder for the tool handle, adjusted by turning a threaded knob. One nice feature, I use collars that lock in place with a set screw along the rod,to make positive stops for grinding several tools without having to reset each time.

Re: Making your own Wolverine and Vari-Grind Jigs?

#5

Re: Making your own Wolverine and Vari-Grind Jigs?

Jim Ketron

>I have a mig welder and this is what I made and it works Great!

I make a lot of my jigs stands and other things for the shop Why buy it when its fun to make them although most people would rather spend there time woodworking rather than building jigs that you can buy. I guess its whatever floats your boat. If you would like some measurments off mine I would be happy to help you out!

Jim


img

Re: Making your own Wolverine and Vari-Grind Jigs?

#6

Re: Making your own Wolverine and Vari-Grind Jigs?

Carol Reed, Strawberry, AZ

>I, like you, like making my own jigs, and I gave my wire welder to my brother who is only three miles away.

I'd love the measurements, Jim.

Thanks.

Post them here or email me directly.

carol@routerlady.com

Re: Making your own Wolverine and Vari-Grind Jigs?

#7

Measurements

Clem Wixted, Jonesboro, AR

>Hi Jim,

I too like to make tools and jigs. Along with your measurements could you post additional views of your jig? Also, how did you machine the curved slots on the jig?

Your work is very well done.

Clem