Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

Sassafras Turning Blanks 8x6x6

Posts

Sassafras Turning Blanks 8x6x6

#1

Sassafras Turning Blanks 8x6x6

Craig Daymon

>Hello all,

I've been away from the board for some time as the shop is in storage, but I do have access to my father's Jet mini so I'my trying out some turning ideas. Starting to attend some Bucks County (PA) Woodturner's meetings and I'm really getting inspired.

I have an idea for something that I want to do and I was thinking that Sassafras might be a great wood to do it in. I need blocks about 8" tall and about 6x6 square. I don't know how Sassafras is to turn, so if it is a bad choice please let me know.

The idea is simply a lidded box for on top of the toilet tank to hold a spare roll of TP. I'm thinking a finish for the outside is probably necessary, but the inside left unfinished. I know Sassafras has a great cinnamon type smell and think it would be just right for that environment when you need the next roll. I'm figuring on putting a 3/4" dowel (probably poplar) in the center of the box about an inch shorter than a roll. Probably drill a shallow hole for the dowel after the box is complete.

So, if Sassafras would be a good wood for this project, does anyone know where to get some Sassafras blanks that size? Any idea what the cost might be?

Thanks in advance,

Craig

Re: Sassafras Turning Blanks 8x6x6

#2

Re: Sassafras Turning Blanks 8x6x6

Mark Kauder. Phenix City, AL

>Can't help you with the blanks, but I have turned a little dried Sassafrass.

Sassafrass is one of my favorite woods to machine in the shop. The smell it imparts to the shop is heavenly.

Anyway, when it is dry, you need sharp tools to maching it (including turning it), or it can leave a frizzy surface. I will leave sharp edges and corners. It can sand a little fuzzy.

Mark

Re: Sassafras Turning Blanks 8x6x6

#3

Re: Sassafras Turning Blanks 8x6x6

Dominic Greco in Richboro PA

>Craig,

For this application, you might want to consider making a coopered turning. In other words, a sort of tall, segmented cylinder. If you have access to a tablesaw, you can cut the segments to the appropriate width, then the right angle. Glue them together, add a disc for the top and bottom and turn to shape. One nice feature of this is the resulting "box" will be very stable.

I also love to turn sassafras as well. It smells great! But it is a bit soft. So like Mark said, you need sharp tools.

I look forward to speaking with you at the next BWT meeting (unless they cancel it due to snow again!).

See ya around,

Dominic

Re: Sassafras Turning Blanks 8x6x6

#4

Richard Allen

Re: Sassafras Turning Blanks 8x6x6

Richard Allen

>Hi Craig

As Dominic said Stave construction would be an easy way to make the holder.

To get the correct angles I use a champer router bit.

I find it is easier to cut the board to width, champer the edges (don't worry about the flat that the bearing rids on as that will be the high point of the stave glue-up which gets turned away) of the long boards and then cut the board to the lenghts needed for the staves.

I use epoxy for the glue and hose clamps to secure the staves while the clue cures.

I find it dificult to get a clean cut much more than 4" into the "canister". So my initial glue-up includes gluing the staves to a waste block...

I would wonder about the finish on one side only. The side with the finish will reduce the movement of moisture. While the unfinished side will more quickly accept and release moisture. I would be concerned that the holder would expand and contract on the inside more than the outside and could result in...

Might be better to make a chamber in the bottom where a potporie or sent could be could be placed.

Wait a minute I am starting to like that idea. Forget I said anything. The unfinished sassafras interior sounds like a terrific idea.

Good luck

Richard

Re: Sassafras Turning Blanks 8x6x6

#5

Re: Sassafras Turning Blanks 8x6x6 *LINK*

Craig Daymon

>Thanks for the responses guys. I got an e-mail from someone with a few extra blocks that should work for me. I'll try to post some pictures when I finish. (I'll clean the bathroom first.)

The stave idea might work better if I was in my own shop with all my tools. Things are at a minimum right now, though compared to another project I've been thinking about, this is an easy on. Great article on stave construction in the latest issue of Woodwork, a GREAT magazine for turners and anyone looking for a bit of inspriation and...they FINALLY have a web site! Latest issue also has an article on the 25th anniversary of the Utah Woodturing Symposium. Nice long articles are a key feature of this magazine. Their site is at:

http://www.woodwork-mag.com

Strong "art" content in relation to woodworking.

Thanks again and I should see you soon Dominick,

Craig

P.S. Ellis, if this is not appropriate, please edit it out.

I am diabetic and I suspect many of you know someone who is as well. It can really screw with your life (besides blindness, loss of limbs and death) even when following the routines. There is some very exciting new research being done that needs more attention. Lee Iacocca (think Chrysler Corp) has already dumped $2 million into it. I'm just asking that you consider reading what is at their site. (Yes, they are looking for donations.) This sounds like a REAL cure! I've provided the link below.


Join Lee Now - Hope for Diabetes Cure