Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Learning to use a skew

Posts

Learning to use a skew

#1

Learning to use a skew

Peter Teubel

>This is the most asked question I receive from my students and fellow club members. While everyone learns differently, I'd like to share with you how I did it.

There's alot to learn from the pioneers of this craft. Rude Osolnik is one of my folk heros, even though I never got a chance to meet the man. One of his famous quotes which I tend to live by is (I may be paraphrasing here, but you'll get the idea...)

Student: "How do I get good on the lathe?"

Rude: "Stand in front of it!"

Simply, yet so true. Practice, practice, practice. When I decided to conquer my fear of the skew, I did just that. After watching Alan Lacer's videos several times, I knew the mechanics in my head. All I had to do was train my hands to obey. I started making snowman Christmas ornaments (article in the AAW journal a few years ago by Nick Cook) and used ONLY the skew....from roughing to finishing. All weekend, I turned and turned....forcing myself to put into play the techniques I saw Alan Lacer demonstrate.

Well, after completing over 150 snowmen, I pretty much had it down pat. Now its second nature. It still requires more attention than any other tool (IMO), but one shouldn't dismiss it as too difficult to learn. All you need is time....and wood.


img

Re: Learning to use a skew

#2

Re: Learning to use a skew

Jerry Whitaker

>Peter,

I like those ornaments. What do you use to make the facial features, buttons etc.

Re: Learning to use a skew

#3

Re: Learning to use a skew

Peter Teubel

>Fabric puff paint. Available from most crafts stores.

Re: Learning to use a skew

#4

Re: Learning to use a skew

Bill Luinetti

>YUP, Peter, I learned the skew the same way: Alan Lacer videotape immersion.

There's no better teacher, though, than some "wake-up catches" just when you think you have the technique down pat.

Practice, practice, practice. I don't think that there is a finer turned finish to be had, straight off the tool, that is.

Re: Learning to use a skew

#5

Re: Learning to use a skew

Doug Trembath

>Truer words have never been spoken in regard to improving technique in all facets of turning, Peter. My approach with students is to insist they abandon the immediate gratification of finishing a project for a little while, and just waste some wood. Lots of it, if necessary. I find that in the classroom students will do anything they can to "rescue" a project after a catch or some other debacle, wasting the pecious and expensive instruction time they have available. I make sure they understand that if they just put in a few hours of dedicated practice, they will be so much farther ahead in the same amount of time they would if they just continued to stumble around trying to fix a mistake. Throw that one away and grab another chunk of wood!

Coming away from a class with a finished object contributes to the feeling that they have gotten their money's worth from the instruction, but it's when they call a week later and tell you how much more rewarding turning has become as a result of the practice they have put in that you know you've made a difference for them.

When folks ask me at a show or gallery opening how I do that, I generally use the line from the old TV beer commercial, "Practice, practice, practice."

Doug Trembath

Studio in the Woods

Re: Learning to use a skew

#6

Re: Learning to use a skew

john Lucas

>Peter

I loved Rude, was able to meet him a couple of times. I think Nick Cook said it well also. He said there are a certain number of catches built into a skew and you have to use them all up before it will behave.

I started turning before video and had to learn to use the skew the hard way. However I didn't really understand it until I saw George Hatfield demonstrate the skew. What an eye opener that was. At that time it would take me an hour to turn a table leg. George did it in 12 minutes and it looked like it had been sanded to 400 grit.

Re: Learning to use a skew

#7

Re: Learning to use a skew

David Galloway

>Peter, You could not say anything more important. My teacher Nick Cook makes all his students start with the morning on ths skew, to get them broken of the fear most folks have.....not just out of his own sadistic bent! He teaches "cutting" rather than scraping, and I think it is an effective method. Later he moves folks to the spindle gouge and then finally to the bowl gouge....no scrapers allowed!

When someone asks me or tells me how long they have been turning, I know that it means nothing. For me, I have had a lathe since 1985, a Conover that I built helped by Ed Moulthrop. But I spent so little time turning, with such bad technique, and with such infrequency. Since returning to Atlanta, and working with Nick, I try to turn every day and will spend significant time wasting wood with skew and spindle.....my wife says we have exquisite fire wood.

In three words: practice practice practice.

In one: practice.

In spirit: enjoy.

David Galloway

Re: Learning to use a skew

#8

Re: Learning to use a skew

Bill Grumbine, Kutztown PA

>I'll echo everything said here so far. My past two students have been here for spindle work, and in both cases, they arrived to see me standing there with a skew in my hand and a square block of wood on the lathe (okay, I am writing figuratively here, but you get the idea!). We spent hours and hours just making wood round, long point up, long point down, vee grooves, pommel cuts, rolling beads, etc. After some time with the skew, most of the day, I allowed the roughing gouge onto the wood just to show that it works too, at least for getting the wood round.

It was a good thing for me to get some practice in too, because last Sunday afternoon I was doing a demo for our new Woodcraft, part of which was skew work. I thought it would be the kind of thing where I stood at the lathe and played around all afternoon while people wandered in and out, watched for a few minutes, talked for a few minutes, and then left. Noooooo, I get there and there is the lathe in front of about 20-25 chairs. The chairs were filled and the room was packed to capacity, with people standing in the doorways, and there I am thinking, boy I hope I don't mess this up!

Bill

Re: Learning to use a skew

#9

Re: Learning to use a skew

rprevett

>All to see the now famous Bill G., I'm sure.

Re: Learning to use a skew

#10

Re: Learning to use a skew

Arch

>Peter, I can't add much, only to affirm your good advice. Turning, whether skewing, gouging, scraping or all things in between, except maybe cutting off, should be done with an easy fluid motion and the only way to advance from the discontinuous ratchet-like movements necessary at first for learning proper technique is deliberate practice and more practice until the flow is second nature, done without deliberate thought. Then and only then, do the cuts become sweet and effortless and turning is concerned with form instead of technique.

I wonder if too much 'hands off book learning' and an excessive fear of catches instead of a devil may care approach might impede the transition.

Turn to Safety, Arch (keep warm up there in N.E.)

Re: Learning to use a skew

#11

Keith Tompkins

Re: Learning to use a skew

Keith Tompkins

>Doug, excellent post!!!!!Nothing annoys me more than a turner trying to salvage a broken turning....I bandsaw mine up just to make sure!

I also teach spindle turning, and use the analogy from my guitar lesson days.....my teacher would say "sure, I can teach you to play that song, BUT if you learn to play your instrument, you can play ANY song."

I agree .....practice, practice, practice!!!!

Re: Learning to use a skew

#12

Keith Tompkins

Re: Learning to use a skew

Keith Tompkins

>Now that we have the skew situation under control, it's time to practice LEFTY! hehe