What do I need to add vacuum to myJet 1236

Re: What do I need to add vacuum to myJet 1236

Fred in NC

>David, I am sorry nobody has answered your question. The probable reason is the number of recent threads on the subject, where it has been covered to exhaustion.

There is a search function at the top of this page. Do a search on "vacuum", and leave the date set at the default. There will be quite a bit of reading, but you will get all your questions answered.

The short answer is that just about any lathe with a hole through the spindle can be used with vacuum. You can buy an adapter from 2 sources, or make your own.

Thanks Fred in NC

David E Whiting

>