Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

Sanding and finishing for chatoyancy

Posts

Sanding and finishing for chatoyancy

#1

Sanding and finishing for chatoyancy

Fred in NC

>Chatoyancy, defined by dictionary as "Having a changeable luster" giving the illusion that one can look right inside the grain of the wood. Most beautiful!

I would appreciate any comments and suggestions.

Re: Sanding and finishing for chatoyancy

#2

Re: Sanding and finishing for chatoyancy

Joel Hunnicutt

>Fred, I do a yellowheart segmented vase that has allot of depth and movement in the wood. I have finished it with clear lacquer and with oil under clear lacquer. I have found that multiple coats of lacquer alone really make the wood come alive. It's almost like the lacquer acts like a lens to focus light into the wood

Re: Sanding and finishing for chatoyancy

#3

Re: Sanding and finishing for chatoyancy

Fred in NC

>Thanks, Joel. If you don't mind:

What kind of sanding sealer, if any, did you use?

What grit did you sand to?

Re: Sanding and finishing for chatoyancy

#4

Re: Sanding and finishing for chatoyancy

John Trant (Baltimore/DC area)

>Select your best figured stock; prepare the surface to perfection; oil deeply. Easily said but it takes time to achieve.

1) The more curly the stock the more obvious the chatoyance however, in my opinion, the subtle beauty of ribboned mahogany is impossible to beat.

2) The surface must be free of bruised fibers or sanding scratches before finishing. The same is true with the final finish in that it must be well sanded (leveled) and polished. With open grained woods, I will apply one or more coates of a penetrating oil finish before I fill the pores with a grain filler. The shimmer is enhanced due to the resultant flat, smooth surface. It would be best to fill the pores with finish but this would take much more effort than most turners are willing to put into their vessels.

3) Multiple coats of a penetrating oil finish is the key (Danish or wipe-on oil). Remember, you are trying to build depth, not thickness. The oil finish in the pores acts like fiber optics by tunneling light deep into the wood (depth!). This works best if the pores are completely filled and the finish is level. A clear top-coat can be added to help protect the surface after the depth of luster has been established. Don't let the top coat build too much or it will look plastic.

John

Re: Sanding and finishing for chatoyancy

#5

Re: Sanding and finishing for chatoyancy

Jack Harrison

>Joel, you're close. The lacquer does act as a mirror of sorts, bouncing light back down into the surface multiple times, allowing it to bounce back up in multiple directions, some of it even escaping to your eyes. That accounts for the added sparkle/shine/depth that you see in work with highly polished surfaces. It'll happen with any surface treatment, it is probably just noticed more with lacquer because we tend to highly polish lacquer finishes.

Side note - that is the same reason that sunbathers apply oil to their skin - it bounces the rays back down into the skin and helps concentrate UV exposure. Sounds safe, eh?

Re: Sanding and finishing for chatoyancy

#6

Re: Sanding and finishing for chatoyancy

Joel Hunnicutt

>I sand on the lathe to 600. Then hit a coat of deft lacquer sanding sealer and let it dry. Then I sand that off with 400 wet/dry paper. Then I hit it with a couple of coats of lacquer. I'm currently using Sherwin Williams T-70 C (verry happy with it). Then wet sand with 400 again. Then I built a few coats and sand with 800 as needed until I'm happy with the surface.

Re: Sanding and finishing for chatoyancy

#7

Re: Sanding and finishing for chatoyancy *LINK*

Paul Porter in Phoenix, AZ

>Fred, I think it also has a lot to do the wood itself. Some woods are just more chatoyant than others. It seems the harder/denser, the more chatoyant. Desert ironwood is the most chatoyant wood I use and it's dense and hard as a rock.


my web site

Re: Sanding and finishing for chatoyancy

#8

Re: Sanding and finishing for chatoyancy

Fred in NC

>Thanks, that is a good tip about the wood itself. I will try that, I have some here.

Re: Sanding and finishing for chatoyancy

#9

Re: Sanding and finishing for chatoyancy

Doug Leite

>Fred,

When I get a really nice, curly Koa bowl, I find that the finer the grit that I sand to, the more chatoyance. I sand on the lathe to 800 paper, then follow with Abralon pads to 4000 grit. I then buff the bowl with Tripoli and White Diamond. I then apply moltiple coats of Watco Danish oil. After the Watco has dried for a few days, I buff again with White Diamond and apply a coat of Renaissance Wax by hand. I feel thet the Watco finish is "In" the wood, rather then "ON" the wood like lacquer. My customers comment that they can "feel" the wood, this way.The oil also darkens and highlights the variation in the grain and chatoyance better. IMO.

Aloha

Doug Leite

Re: Sanding and finishing for chatoyancy

#10

Re: Sanding and finishing for chatoyancy

Sam Simpson

>Hi Y'all,

Fred, trying to improve the appearance of what we see requires an understanding of what we are looking at.

To fully understand chatoyance, I always use the fresh mown grass analogy. You know, how a playing-field can appear to have different stripes of green. We know that the pattern is simply caused by the grass being turned in one direction or another. Same thing with wood grain. I like to tell folks to visualize the grain as a bunch of drinking straws, and when you look at the end of the bunch they will be different than when you look at the side. Same with wood, the end grain appears darker.

So the best way to visualize how to finish for best effect, is to imagine that you are looking at grass waving about in the bottom of a clear flowing river. The grass appears to dance and create patterns as the water washes differing current flows over it. It is most obvious in deep slow flowing pools.

In this analogy the water represents the finish. It shouldn't come as much surprise that the clearer, the cleaner the better.

One of the most important things mentioned by the other posters, is to sand everything to its very best. Sanding scratches would be analogous to tree branches littering the bottom of our mountain pool. The second is to fully wet the grain. This is probably the hardest concept to explain. To not wet the grain would be analogous to putting a sheet of glass between the water and the grass in our mountain pool. Folks often advocate using oil as the first coat when finishing figured woods. This is because it is a foolproof way of fully wetting the wood. But if you can do it with clear lacquer the results will be even cleaner. Any amount of pigment or filler or flatting agent will have a dulling effect. That would be analogous to pouring silt into the water.

For the very cleanest look I would follow Joel's methods, using only clear lacquer, no sanding sealers. And I would thin my first coat more than the others and fully soak it, even at the expense of runs that might require some later prep work.

This method is not always the best answer though. Often a project can appear naked with such harsh finishing, particularly furniture pieces. I find it to be quite often that the golden amber tones of oils and toned lacquers will improve the appearance of a project by softening the harshness of a water-white clear finish.

Regards Sam Simpson.

Re: Sanding and finishing for chatoyancy

#11

Thank you very much !!!

Fred in NC

>It has been quite an education in just a few hours! I really appreciate the time everyone took to answer my questions.