YES, I use a laser - here is mine
Mark Kauder, Phenix City, AL
>Believe me, I DO NOT want to start another mess about lasers, but here is the one that I built.
It is based on the design by Kevin Neeley on his website www.turnedwood.com). If you are intested in this one, some of the sources listed on Kevin's website no longer have the items. I have let Kevin know, and have alternate sites if you are interested. Total cost was about $45.
I used a different clamp, so that I can mount it on most anything. I made it first purely to measure where the bottom of bowls were, and mounted it on a stick.


Mark




