Knowledge You Can Build On — Est. 1998
What do you think of this hollowing tool?
Alan Tolchinsky
>I saw this on ebay and wondered how it compares to the Scorpian discussed below? How does it compare to others in price and perceived utility? http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=4346733935&ssPageName=ADME:B:WN:US1Thanks Alan in Md.
Re: What do you think of this hollowing tool?
Fred in NC
>His web page:
http://www.monster-wood-tool.com/wst_page4.php
Thanks Fred, much easier to use.:)
Alan Tolchinsky
>
Re: What do you think of this hollowing tool?
Wood Spinner
>I believe you can make the same tool cheaper.
Grinder, Drill press and a tap and die.
You can buy the tool steel cutter for a couple of bucks each.
Good turning and be safe
Bill in Casa Grande, AZ.
Re: What do you think of this hollowing tool?
Fred in NC
>I have made a lot of tools and accessories. Certainly it costs less to make if you have all the tools and supplies. The hard lesson I have learned is that SOMETIMES it costs more considering shipping, car trips to get parts, etc.
Of course, it is more FUN to make than to buy!
hollowing tool? -Link- *LINK*
Bill Kay
>I make my own using these bits. The round bar stock comes from the hardware store.
HSS Bits
