Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

PM 4224 and 3520

Posts

PM 4224 and 3520

#1

PM 4224 and 3520

Sam Dean

>Hi All,

Does anyone have a Powermatic 4224 or 3520? If so, would you mind telling me your likes, dislikes and additional wants from the machine? I'm still on the (never ending) new lathe quest.....You know, the monster lathe on the not so monster budget? Oneway, Stubby and Vicmarc just cost too much right now (I think mainly from the poor exchange rates). The wife is letting me build a 30x50 shop AND get a new lathe, so I really need to keep the price down to stay on the good side!

Thanks to all!

Sam

Re: PM 4224 and 3520

#2

Re: PM 4224 and 3520

Duane C.Leach

>Hi Sam

I have the 4224 Powermatic and it fits me.The thing I would change is to add a spindel lock. The adjustable feet are a joke. Supporting 1000 lbs on 4 3/8" bolts isn't very stable. It wasn't much of a problem though. I had to raise the spindle height anyway so I made 4 riser blocks with a hole in the center of each. The cast iron legs set on the blocks. The adjustable feet fit into the holes and keep the riser blocks from moving.

I would urge you to try these lathes out for your self before buying. See if they fit you.

Re: PM 4224 and 3520

#3

Re: PM 4224 and 3520

john Lucas

>Sam

I own a 2035 and have turned on a 2442. I love my lathe. Since I don't turn really big stuff I don't need the bigger one but I love the sliding headstock so I might not buy the big one anyway. It may have been the particular lathe I was turning on but I think my 2035 runs smoother. With the 2035 you can hollow a vessel in the standard headstock position using a captured boring bar or you can slide the headstock to the end and stand at the end to hollow using a hand held hollowing rig. It is much more comfortable and you have better control of the tool.

If you don't mind turning from a free standing tool rest you can turn much larger work. I don't have one yet but when I get the time I'll build one.

Re: PM 4224 and 3520

#4

Re: PM 4224 and 3520

Sean Troy

>I have the 4224 and wouldn't change a thing on it. It's built to last as long as you'll be turning. The people I know who own the 3520 will tell you the same thing. Sean

Re: PM 4224 and 3520

#5

Re: PM 4224 and 3520

Sean Troy

>My 4224 has a spindle lock.

Re: PM 4224 and 3520

#6

Re: PM 4224 and 3520

Jack Stevenson

>I've got a 3520 and would not trade it off for anything!!!

It sings.

It actually is so steady that my percentage of snags is almost nil to none compared to my old HF.

I figure that if the 20" is a problem then get the outboard accessory that PM offers.

I could go on, but I don't want to sound like one of those talking heads pitching snake oil on TV.

Jack

Re: PM 4224 and 3520

#7

Re: PM 4224 and 3520

Earl

>Just bought the 3520 after months of thinking and research. I acutally could have barely afforded a bigger lathe but would have had no $ left for tools and other toys. Somebody on another forum, I think, said the knew alot of people who have upgraded to a 3520 but knows nobody that has upgraded from the 3520. That may be stretching it, but it's a great lathe.

I recently turned a 7" wide by 11" tall vessel, and the tools worked like butter due to the smoothness and power.

I can see the biggies if you have alot of spendable cash or are a professional, but otherwise I can't imagine needing more.

Earl

Re: PM 4224 and 3520

#8

Dick Hines

Re: PM 4224 and 3520

Dick Hines

>I turned on a One Way and liked it very much but was glad to get home to my 3520.

Have had the 3520 over a year and have had no trouble at all. I like being able to move the head stock. Sure makes is easier to turn big bowls and hollow forms.

As far as only haveing a 20" throw I don't want to turn anything I can't lift any way.

You won't regret buying a 3520.

Re: PM 4224 and 3520

#9

Re: PM 4224 and 3520

David Galloway

>I love my 3520 and think it's the best value on the market by a long shot. I have turned outboard, by moving the headstock to the end, allowing me an almost unlimited possibility for diameter. Just turned a 24" cherry salad bowl....that's a lot of salad!

There are many options including bed extentions if your are doing production spindle work. The new model (mine is serial # 0003) has a number of new features that I would love to have. Rumor has it that a new model is on the way that would include a digital readout of RPM...a nice but unnecessary option. As the other folks have said, it will give you all you need for a lifetime of turning. Even without the huge price differential, I would recommend the 3520 in a heart beat!

David Galloway

Re: PM 4224 and 3520

#10

Re: PM 4224 and 3520

vince

>If not too late, will add another endorsement for the 3520a. I've had mine for less than 6 months, and it's been a great lathe and a terrific value. Moveable headstock for direct/straight access to bowl turning undoubtedly is the lathe's best feature. Drawbacks are pretty minor: fit and finish is "rough" (but only cosmetic), if you do small work you'll need to get a smaller toolrest (it's like 12 or 14" and is great for a lot of stuff but not small spindlework); the motor is good and strong, but must admit it's not as smooth & quite as the 2436 (which you can hardly tell is running when tuned right). good luck in choosing what's right for you. vince