Need a new Lathe Stand

12/10/04, 3:30 PM #1

tom norton
Guest

Need a new Lathe Stand

tom norton

>After watching a Raffan video I noticed,For the first time,that my lathe is too low. I guess I I have noticed in the past it was not quite right but...

Anyway, I have an older Rockwell/Delta model on the original stand with a box of sand underneath. But I was wondering if anyone has a plan for a unit that has some heft to it? Maybe a plywood box affair with sand ballast?

Also anyone ever make some type of bed extension for turning longer spindles?

Thanks

I guess I am getting bit by the Turning Bug!!

Re: Need a new Lathe Stand

12/10/04, 6:04 PM #2

Carole in VA
Guest

Me too

Carole in VA

>Don't have room for the bed extension on my mini. I think I am going the 2x4 with 1" MDF top, bottom shelf and a slanted tool shelf under the top.

Re: Need a new Lathe Stand

12/11/04, 2:04 PM #3

Phil Joines Krum, Texas
Guest

a suggestion

Phil Joines Krum, Texas

>Put some spacer blocks between the lathe and stand. You can try various heights until you find want you like and it makes cleaning a log easier. Once you have the height then dssign the stand.

Re: Need a new Lathe Stand

12/12/04, 2:49 PM #4

Walt C
Guest

Re: a suggestion

Walt C

>Actually, I set my lathe feet on 2x4's and was so happy with the height that I left it that way. More time for turning!

Walt, who is making shavings on Christmas bowls in MN

Need a new Lathe Stand

Posts