Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

Drop spinning spindles *LINK*

Posts

Drop spinning spindles *LINK*

#1

Jim Barbour

Drop spinning spindles *LINK*

Jim Barbour

>Any one out there making drop spinning spindles? I am interested in turning them, but know very little about the various dimensions, types, etc. Do you know of a good source for general information about the various types and their associated dimensions? How critical are the dimensions and weights, or is this a matter of individual taste and must be turned with a particular spinner in mind?

I can find lots of sites with them for sale, but not much behind-the-scenes information. I was able to locate one article by David Reed Smith in The American Woodturner from a few years back (link below to the author's version on his site), and while it is extremely helpful it does not provide anything beyond this one type of spindle and pictures of two others.


http://www.davidreedsmith.com/Spinning/Judi.htm

Re: Drop spinning spindles *LINK*

#2

Re: Drop spinning spindles

Joe Herrmann

>You might try contacting David directly at david@davidreedsmith.com. He is very knowledgeable and I have found him to be most willing to answer questions. Perhaps he can provide some direction.

Joe

Re: Drop spinning spindles *LINK*

#3

Re: Drop spinning spindles

Scott Thorburn

>I make a few drop spindles for some friends who are into a historical recreation society. The general dimensions are aprox 10" tall 2 - 4 " diameter whorl and the overall weight is between 20 -60 gm. I make a variety weights and sizes because it depends on the material being spun and how thick they want to make the thread. I find that a couple of the people are just hooked unto using exotic woods. I have made one piece and two piece units . I find that the two piece take more time than they are worth, so now I generally just make one piece units ( Units that have the shaft and whorl glued together rather than a taper or square connection).

A good way to start would be to ask your possible customers what they are looking for.

Re: Drop spinning spindles *LINK*

#4

Re: Drop spinning spindles *LINK*

mike recchione

>I've made a few of these for my wife and her friends, and I'm still working to perfect the technique. Glueing up the shaft and whorl before turning seems like a good idea that I hadn't thought of. (Maybe that's obvious to some, but I'm still pretty much a novice turner). Regarding weight and dimensions, it all depends on what's to be spun. Heavier yarns take heavier/bigger spindles, thinner yarns need more delicate spindles. Cotton and wool have different requirements. And then there's the whole top whorl/bottom whorl controversy as well as the supported/unsupported question. It seems a spinner needs almost as many toys as a woodworker. :-)

I've been modeling my latest attempts after the Bosworth spindles. (He makes a few different sizes). They appear to be the current favorites of my wife's spinning guild.

I'd be interested in hearing what else you find out. Good luck.


Bosworth Drop Spindles

Re: Drop spinning spindles *LINK*

#5

Re: Drop spinning spindles *LINK*

Fred Holder

>For a couple of years, I made drop spindles for a lady who resold them to spinners. Between us we worked out a design that she could sell and that I could make fairly easy. I did a story on the making of that drop spindle in the January 2001 issue of More Woodturning.


Fred Holder's Domain Site