WoodCentral Forums

Est. 1998 — 27 years of woodworking knowledge

What the best way to get rid of critters

Posts

What the best way to get rid of critters

#1

What the best way to get rid of critters

Ron in Drums PA

>A month or so ago, a friend shipped me a section of mesquite crouch. It's been wrapped in a double layer of plastic since. I just open up the package and noticed some dust and at closer inspection I found some black and yellow bugs.

I was hoping someone would have a suggestion on how to best kill these critters.

When I was a kid I would catch bugs and place them in a jar with nail polish remover (acetone), this killed them pretty quickly (Don't ask, I wanted to be a entomologist). Do you think if I placed a small jar of acetone into the bag it might kill the insects?

Any suggestions will be helpful. Thanks.

Re: What the best way to get rid of critters

#2

Re: What the best way to get rid of critters

john dillbeck

>Put int in a plastic trash bag and spray it with a bug killer, there are many available, and close bag and keep sealed for a week or so.Should get rid of all the pests.

Re: What the best way to get rid of critters

#3

Re: What the best way to get rid of critters

Stuart Johnson

>Ron, I don't know about the acetone but this might be a way to test my idea about dry ice. After a recent chat session I tried to do some Google research on non-chemical ways to kill the critters. Just about eveything I read talked about oxygen / low atmoshphere plus cold for eggs. I got to thinking about sealing the blank in a cooler with a large chunk of dry ice. I think the dry ice would take care of any oxygen but I don't know if it would drop the temp enough for any eggs. I would have to drive into Dallas for dry ice so I haven't tried it yet.

On the other hand I usually turn Mesquite to a finished size and then microwave it. If you do it this way be sure to wear a facemask to catch the splatters.

Re: What the best way to get rid of critters

#4

Re: What the best way to get rid of critters

Joe Herrmann

>I bought a large carving at an art show once that I discovered was infested when I got it home. It was too expensive to destroy, so I talked with the chemestry teacher at school who suggested that I use carbon Tet. He had some so we fumed the carving for about 24 hours and I never saw any bugs afterward. Unfortunately this stuff is no longer available.

Joe

Re: What the best way to get rid of critters

#5

What about a bag connected to...

TDaniel

>the exhaust pipe of a Chevvy?

Re: What the best way to get rid of critters

#6

Re: What about a bag connected to...

Stuart Johnson

>You might have a problem sealing and keeping it oxygen free long enough.

Re: What the best way to get rid of critters

#7

Re: What about a bag connected to...

Al Crandall

>Might not that give the same result as driving a potato up the tailpipe. The engine dies from back pressure. You suggested this to me before, and as soon as I can figure how to keep the plastic bag from melting where it is sealed to the hot pipe or its extension I may try it.

Re: What the best way to get rid of critters

#8

A member of our clubs says:

TDaniel

>Put a jar lid of gasoline in a plastic bag with the wood and seal it up and place it in the sun. He says it will kill anything in there. Worth a try.

TD

Re: What the best way to get rid of critters

#9

A member of our clubs says:

TDaniel

>Put a jar lid of gasoline in a plastic bag with the wood and seal it up and place it in the sun. He says it will kill anything in there. Worth a try.

TD

Re: What the best way to get rid of critters

#10

Re: What the Results

Ron in Drums PA

>I placed a jar of acetone into a black garbage bag. It sat all day in the bright sun on our black top driveway. It was cooking, I was afraid that the plastic might melt from the chemical fumes.

I just cut the log open and the critters seemed to have died with a smile on thier faces. I'll leave everything in the bas over night - Just in case!

Thanks for all you ideas and responses.

Oh and TD - Your idea was so good it WAS worth mentioning twice. ;-)

Re: What the best way to get rid of critters

#11

Hey No Bustin' On Terry

Mark Mandell - Gone Round In Jersey

>YOU'RE gonna git old too some day.

|;-}}}}}}}}

Re: What the best way to get rid of critters

#12

Re: A member of our clubs says:

Mike Schwing from Maryland

>I'm no chemist but that sounds terribly dangerous!

Re: What the best way to get rid of critters

#13

Re: Hey No Bustin' On Terry

JamieDonaldson

>But then the wood would smell like gas forever-and so would your shop! I think acetone would at least smell better, but is reported to be a carcinogen.

Re: What the best way to get rid of critters

#14

If the wood is small or the

Mango

>freezer is empty could you not freeze the wood for a week and kill the critters. what if you had a chest o freezer. Seems to me if there no termites in the colder north it would work.

Never have done it was just thinking, would the wood suffer much. if it were sealed from extra moisture except what was in the bag its sealed in. Just thinking

Re: What the best way to get rid of critters

#15

Al, It...........

W.C. Turner

>don't work. I saw it on Myth Busters. The motor doesn't die, but, the exhaust shoots the tater out like a cannon.

W.C.

Re: What the best way to get rid of critters

#16

Well, tater cannons are cool in their own right.

Al Crandall

>However, I still haven't got the connection between a hot pipe and a plastic bag figured out yet. Help me there, please?

Re: What the best way to get rid of critters

#17

Re: If the wood is small or the

Bob Hackett

>Some bugs can live thru the deep freeze(they live thru 20+ below here every year).What kills these guys is the dehydration you get with the frost free feature.What you`re actually doing is freeze drying them,so a bag will stop this effect.

As a bonus,I`ve found that freezing seems to tame some real problem woods like lilac and apple.I`ve had far less cracking and distortion after freezing.

Mainely,Bob

Re: What the best way to get rid of critters

#18

Re: What the best way to get rid of critters

Tom Reiman

>Ron, If the piece is small enough I use the microwave. I have one in my shop so as not to cause a family disturbance. I bought it at the local Goodwill store for $20, and just use it on everything that I get from someone. Works great! I usually use it for 1-2 minutes on high.

Re: What the best way to get rid of critters

#19

Re: What the best way to get rid of critters

Fog Tanner

>Living in Texas, I turn a lot of mesquite. When I have a piece that has some livestock roaming through it, I place it in a plastic garbage bag. I the take a cap full (cap from a can of spray paint) of moth balls and place in the bag and seal it up. After a few days the munching is gone and so is the livestock. I normally leave it in the bag until I need it.

Some of my club members have soaked the wood/piece in paint thinner, others just turn the piece and microwave to kill any larve.

👍 This page answered my questions

Your vote helps other woodworkers quickly find the answers and techniques that actually work in the shop.