Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

Interest in a Baltimore based turning club?

Posts

Interest in a Baltimore based turning club?

#1

Interest in a Baltimore based turning club?

Mike Schwing from Maryland

>Baltimore based woodturners have no local turning club (that I am aware of). There are several excellent clubs in the Annapolis/DC/Northern Virginia area but none right here in town. For selfish (time) reasons I am willing to do some leg work in establishing a local club.

I do know that there is someone looking at starting a club in Frederick as well.

I believe (pretty darned sure) I can secure an interesting location for meetings, equipped with lathes and plenty of tools, and would be interested in holding monthly meetings during the cooler months.

If anyone else is interested, please respond here or in email. We will need yes, or maybe answers to prove interest for the owner of the location I have in mind.

Re: Interest in a Baltimore based turning club?

#2

Re: Interest in a Baltimore based turning club?

Gerry Meekins

>Sounds good Mike.

Count me in!

Gerry

Re: Interest in a Baltimore based turning club?

#3

Interested (and a ?)

John Trant (Baltimore/DC area)

>Hi Mike,

I am interested because I have the same problem. Where in the Baltimore area you looking? I am in the southeast corner of Howard County so it takes me the same time (45 minutes) to go to CAW (in VA/DC), CW (Annapolis), or the Woodcraft in Towson (north side of Baltimore); i.e., not too far from anywhere but close to nothing.

I would stongly suggest that you attend the CAW and CW meetings for a while so that you can learn what to do and what not to do. Both are excellent clubs !!

John

Re: Interest in a Baltimore based turning club?

#4

Re: Interest in a Baltimore based turning club?

Mark Kauder, Phenix City, AL

>Mike,

I started our club about 1.5 years ago. It is funny, you get 3-4 turners together, and you will find that each of them know a couple more that aren't in a club, and before you know it, you have 20-30 people.

You might also look in the approprate states in the AAW directory for people in your area, and contact them.

Good luck.

Mark

Re: Interest in a Baltimore based turning club?

#5

Re: Interested (and a ?)

Mike Schwing from Maryland

>John, I do plan on attending some of the meetings in the areas that you mention, I just have, as you know, a sport/hobby OTHER than turning that takes up a lot of time. Chances are, if it is a weekend, daylight, and not raining, I'm out on my bicycle. Even the prospect of meeting other turners and learning new things pales in comparison with a long bike ride, for me anyway. Better opportunities for me to make a drive in the cold weather.

Where am I looking? Don't want to say until I ask for the formal OK.

I think that I will try to make an exception for the CAW Sep. meeting. I'd really like to meet you guys. Hopefully it will be a horrible day.

Re: Interest in a Baltimore based turning club?

#6

Re: Interested (and a ?)

Tom Mullane, Hagerstown, MD

>I live in Hagerstown (Washington Co.) and go to both the Quad State Bodgers in LaVale, MD and the Apple Valley Woodturners in Winchester VA.. both are just about an hour drive for me... I am not looking forward to going to Cumberland County in the winter, LOL

I can only go to Saturday meetings because of family obligations.. let me know what is happening and if the drive is about the same I might be interested..