Bottle Stopper suggestions..

Re: Bottle Stopper suggestions.. *LINK*

Stuart Johnson

>Robert,

If you don't get your answers here you might want to check out the stopper group over on Yahoo.

http://groups.yahoo.com/group/stopper/


http://groups.yahoo.com/group/stopper/

Re: Bottle Stopper suggestions..

Phil Joines in Krum, Texas

>I think you can use any of the stopper setups available from the turning suppliers for wine because they are fairly standardised. Other bottles aren't and you'll need to check the size of the hole. We have used cut down cork stoppers for smaller bottles.

BTW I like the looks of the metal wine stoppers without the corkscrew better than the one with.

Re: Bottle Stopper suggestions.. *LINK*

MikeinCapeMay

>I buy stopper cones from PSI, 100 at a time, best price that I've found. If I want exotic wood I buy that from Craft Supplies, who IMO is one of the best retailers in this business. Craft Supplies URL is:

http://www.woodturnerscatalog.com/

If I want domestic wood I use scraps and leftovers from cutting bowl blanks.

Someone posted the link to Yahoo stoppers group, lot of good info there.

The stopper cones that I use fit all bottles.

Below is the link to PSI


PSI

Oh Yeah

MikeinCapeMay

>I much prefer the chrome and rubber gasket cones. I also use the threaded bottle stopper chuck that PSI sells, works much better than the bolt with the head cut off. However, I find that a 21/64" bit works much better than the recommended 23/64".

Hope this helps you and good luck.

Re: Bottle Stopper suggestions..

Robert Case

>Thank you so much for the replies-thanks!

Robert

Re: Bottle Stopper suggestions.. *LINK*

Mainebowlmam

>Found some a few cents better at the link below. I use them a lot and find their prices extremely good!

Jack


WoodenPost