Est. 1998 — 27 years of woodworking knowledge
Need instructions for mystery pen
Phil Joines Krum, Texas
>I've had this kit for two or three years and can't figure out how it goes together. There seem to be 2 top pieces, 1 with a clip and 1 without. Also can't figure how the 2 tubes connect. There's no center band. The package was still sealed so all the parts should be there. It's a 10mm.
Try this link Phil *LINK*
Larry Hancock; Ardmore, OK
>I have some of those pens from a long time ago. The top tube for the end clip has to be notched and there is no decorative band that goes on the tube at the center. When you take the top off you have to hold it or set it down on the table and take a chance on losing it. Not the most popular design that has come out I don't think.
Re: Need instructions for mystery pen *LINK*
RevDoug
>Larry's got it right. Woodcraft called it the Presidential. It's a nice pen, but you do need to figure out what to do with the cap when using the pen. Kind of agravating.
Turn 'em round,
RevDoug
Wood Spun Roud
Thanks guys!
Phil Joines Krum, Texas
>Since I don't have any bushings to go with it I think it'll go on Ebay with a $25 minimum :>).