Remote Switch for a Jet 1642
Lee Weed
>I want to put a remote swich on the end of the lathe for hollowing.Would a typical switched recepticle work? or would that somehow damage the motor?
Thanks,
Lee
Remote Switch for a Jet 1642
Posts
Re: Remote Switch for a Jet 1642
#2Re: Remote Switch for a Jet 1642
John Lucas
>Lee
If it's anything like my 3520 and I assume it is, a regular switch will work. You can also buy one that's very similar to the 3520 switch, from woodcraft. You just plug this one in but I would have to go back and look to see if it is 110 or 220.
Re: Remote Switch for a Jet 1642
#3Re: Remote Switch for a Jet 1642
Lee Weed
>Thanks John,
I have a call in to Jet Technical Support to verify that leaving the switch on, and switching power on/off at the recepticle won't damage the inverter or motor
Lee
