WoodCentral Forums

Est. 1998 — 27 years of woodworking knowledge

Figured Maple Vessel

Posts

Figured Maple Vessel

#1

Figured Maple Vessel

Dave Peebles Lyons, Ohio!

>Hello,

It has been some time since I posted anything new. I am in the process of re-doing my web site and had a chance to take some new photos tonight.

This is a piece of figured Maple the I got locally. It is about 8 1/4" x 4 3/4" Sadly, by the time I got the call that it was being taken down, there were only a couple of chunks left. I sure wish my timing had been better, but I am happy with what I got.

I was able to get this piece and a smaller vessel out of it. I also have several cores drying from the same tree. The biggest of them is about 17".

Thanks for looking,

Dave


img

Re: Figured Maple Vessel

#2

Keith Tompkins

Re: Figured Maple Vessel

Keith Tompkins

>nice piece, Dave. I just cut up a large maple with similar pattern. I hope my pieces turn out so well!

Re: Figured Maple Vessel

#3

Re: Figured Maple Vessel

Dave Peebles Lyons, Ohio!

>Hi Keith,

Thanks!! I haven't been able to post here much lately. Life keep getting in the way :) The shop is undergoing a major re-do, The web site hasn't been changed since before the Flintstones, and I am being tempted by an offer of a real job. :)

But your work is an inspiration to me, I do not do the same type of work, but I can always tell a talented artist when I see the pieces you post.

Thanks,

Dave

Re: Figured Maple Vessel

#4

Nice work Dave!

Dominic Greco in Richboro PA

>

Re: Figured Maple Vessel

#5

Re: Figured Maple Vessel

Tony Reynolds in Newark, Ohio

>Hi Dave,

Very nice!! Great form, and I love the wood.

Tony

Re: Figured Maple Vessel

#6

Re: Figured Maple Vessel

Ron Sardo in PA

>Nice form Dave.

Did you dye the wood?

Re: Figured Maple Vessel

#7

Re: Figured Maple Vessel

Brett Sherwood - Richmond, IN

>Super sharp vessel Dave !!! That wood grain is spectacular.

Brett

Re: Figured Maple Vessel

#8

Re: Figured Maple Vessel

RevDoug

>Another nice job, Dave. I always look forward to seeing your newest projects. Good looking piece of wood too.

Re: Figured Maple Vessel

#9

Brad Vietje

Re: Figured Maple Vessel

Brad Vietje

>Beautiful work, Dave. I'd re-touch the color balance a bit to lower the green level, but a very nice job on the turning.

Safe Spinning,

Brad Vietje

Thetford, VT

Re: Figured Maple Vessel

#10

Re: Figured Maple Vessel

Wally Dickerman at Green Valley, Az.

>Very nice form Dave, and what a great piece of wood. I think that fiddleback is my favorite. I used to get offcuts, etc. from a a guy that sold musical instrument wood, and most of that was fiddleback.

Wally

Re: Figured Maple Vessel

#11

Re: Figured Maple Vessel

Sean Troy

>Dave, Your work is always eye-candy. Sean

Re: Figured Maple Vessel

#12

Re: Figured Maple Vessel

Mark Kauder

>Very nicely done Dave!

I like the little rim.

Mark

Re: Figured Maple Vessel

#13

Re: Figured Maple Vessel

Dave Peebles Lyons, Ohio!

>Hi Ron,

Nope, no dye on this one. Just the way it came from the tree. I sure wish I had been able to get the whole tree.

Thanks,

Dave

Re: Figured Maple Vessel

#14

Re: Figured Maple Vessel

Dave Peebles Lyons, Ohio!

>Hi Brad,

Thanks, I didn't realize how green it looked when I posted it. John Lucas also gave me some advise on the same thing. I was able to correct it somewhat with my photo editing program.

I also found a little more info on color balance in the manual that came with my new camera . Gee who would think of reading the manual. :)

Thanks,

Dave

Re: Figured Maple Vessel

#15

Thanks everyone

Dave Peebles Lyons, Ohio!

>Thanks to everyone that posted their comments, or took a look. It's always great to find a nice piece of wood like this. It's even better if it gets to completion without blowing it up. :)

Not that I ever do that :)

Thanks again,

Dave

Re: Figured Maple Vessel

#16

Re: Figured Maple Vessel

David Eaves

>Excellent.., the form, finish and wood are just great.

Thanks for posting, I like to see different forms that I might try out one day.

David

👍 This page answered my questions

Your vote helps other woodworkers quickly find the answers and techniques that actually work in the shop.