CA Glue for Bowl Blanks?
George Van
>Which CA glue should I use to attach a bowl or platter blank to a wooden faceplate blank?
How long should I wait before turning?
Can the bowl blank be green?
Thanks, George
CA Glue for Bowl Blanks?
Posts
Re: CA Glue for Bowl Blanks?
#2Re: CA Glue for Bowl Blanks?
Wally Dickerman at Green Valley, Az.
>George, use medium visc. CA. Apply lots of glue. When glueing waste blocks, if there is a failure it's almost always because not enough glue was used. Don't clamp it, just a few seconds of hand pressure. You can mount it on the lathe immediately. CA glue works well with wet wood.
Wally
Re: CA Glue for Bowl Blanks?
#3Re: CA Glue for Bowl Blanks?
George Van
>Thanks Wally,
I will give it a try this evening.
George
