For those egg turners out there..>>
RonZ
>..>> what do you use to reverse chuck your eggs and finish the bottom?
TIA,
Ron
For those egg turners out there..>>
Posts
Re: For those egg turners out there..>>
#2I use a skew
John Cahall
>I cut a tenon 9/16ths square on my blank then pound that into my #2 morse taper. I turn the egg then part off the end nearest the headstock with my skew. Very little touchup on the nubb left. Works for me. (And Alan Lacer)
Re: For those egg turners out there..>>
#3Re: For those egg turners out there..>>
Mike Schwing from Maryland
>A padded vice, instrument makers' handplanes, cabinet scrapers, and sandpaper.
