Penn State utility 4 jaw chuck? *LINK*
Nathan Pettigrew
>Hello all!
Has anyone had an experience with this Penn State (PSI) chuck? For $45 it looks like a good deal, if it works.
Penn state utility 4 jaw chuck
Penn State utility 4 jaw chuck? *LINK*
Posts
Re: Penn State utility 4 jaw chuck? *LINK*
#2Re: Penn State utility 4 jaw chuck?
floyd knapp
>I've had one for 6 months. I have a Total Shop lathe that is 14 yrs. old,has a 1x12 headstock spindle so I had an #2 MT made as it came with 1x8 and 3/4-16 adaptor,As far as I can see it does all that I want it to do. It's jaw opening is large and you can grip your stock either outside or inside. Seems to work easily and grips well. No problems to date.
Floyd
Re: Penn State utility 4 jaw chuck? *LINK*
#3Re: Penn State utility 4 jaw chuck?
Ray
>I have had one for about six months now. I no linger use it as I bought a Oneway Talon lst weekend. The problem with the PSI is that it takes two bars to loosen and tighten it. You need a third hand to hold the stock while you tighten. Now, you find pretty creative ways to get around this, but it is a hassle. Other then that, It is not to bad for the money.