Safety glasses
Philip Duffy
>Just a note; CA glue on my safety glasses. Cause? A bit too quick on the ON switch. Best be careful out there guys and gals as CA glue in the eyes would not be fun! Take good care. Philip
Safety glasses
Posts
Re: Safety glasses
#2Re: Safety glasses
George Van
>Thanks for the tip Phil,
I will be attempting my first use with CA glue shortly.
George
Re: Safety glasses
#3Re: Safety glasses
Clay Reeves
>Left my glasses off (new glasses) while I turned a wine cork recently and while roughing out the blanks between centers accidentally slipped with the 3/8" beading tool too close to the drive spur and chipped a corner. Now I have been to the eye doctor three times and had the tiny chip ground out with a fine burr. Looks like I will regain most of my visual acuity but don't make my foolish mistake and try turning without a shield or glasses at the least. Lost a few nights of sleep, a few days of work, a line or two off the bottom of the chart, and scratched the new glasses on the doctors equipment anyway (while in my shirt pocket).