WoodCentral Forums

Est. 1998 — 27 years of woodworking knowledge

Curly Maple Bowl - Critique Results

Posts

Curly Maple Bowl - Critique Results

#1

Curly Maple Bowl - Critique Results

Ron Sardo in PA

>Curly Maple, 6" x 4" (widest part) x 1/8" thin. 8 coats of Hand Rubbed BLO (No Gloves)

This bowl is the results of the first critiques I had asked for. The advise I applied to this bowl are .

1. Make the bowl thinner

2. Make the top edge more interesting instead of dead flat.


Thanks everyone!

Re: Curly Maple Bowl - Critique Results

#2

VERY nice!

Brian Roberts

>Hi Ron - VERY nice. That bowl looks "right"!!

It flows well and I really like the return curve at the top!

It looks "stable" and makes me want to pick it up and touch it.

Nice work!

All, of course, IMHO,

Brian

Re: Curly Maple Bowl - Critique Results

#3

Re: VERY nice!

Brian Roberts

>Also - the inside looks like it follows the form of the outside - which I personally think is important. When I pick up, and/or look at, something that does not have the same form inside and out, it just doesn't "do it" for me.

Again, very nice work!

PIC of the inside?

Brian

Re: Curly Maple Bowl - Critique Results

#4

Re: VERY nice!

Ron Sardo in PA

>Brian, The inside loosey matches the outside. At the "bulge" it's about 3/16"-1/4" thick where the reat of the bowl is 1/8".

I take an inside pic and I'll post it.

Re: Curly Maple Bowl - Critique Results

#5

Re: Curly Maple Bowl - Critique Results

Wally Dickerman at Green Valley, Az.

>Well done Ron. Proportions are good, curves are good, the rim looks great. This particulr form is one that I like. There are variations that work well. Try leaving a sharp, almost knife edge corner where the curve goes into the rim area. The curve of the sides can be left fuller, and even continue to a more closed form. Then using the sharp edge, curve into the rim. Experiment. All part of the fun of turning.

Wally

Re: Curly Maple Bowl - Critique Results

#6

Re: Curly Maple Bowl - Critique Results

David Eaves

>Hi Ron,

I really like this form and think you have created a lovely piece there. My only thought would to be to have a less sharp junction at the base it seems a little abrupt.. maybe. Certainly just personal preference though. I like the curly maple too.

David

Re: Curly Maple Bowl - Critique Results

#7

Keith Tompkins

Re: Curly Maple Bowl - Critique Results

Keith Tompkins

>Hi Ron, looks like you killed three birds with one stone.....beautiful!

Re: Curly Maple Bowl - Critique Results

#8

Re: Curly Maple Bowl - Critique Results

Bill Grumbine, Kutztown PA

>Hi Ron

That is a beautiful piece of wood you have there, but even if it were nothing more than a piece of bland looking poplar, you would still have a great looking turning. The shape is very well done as are the proportions. Keep up the good work!

Bill

Re: Curly Maple Bowl - Critique Results

#9

Wow! Very nice indeed!

Jonathan Kaplan (OR)

>

👍 This page answered my questions

Your vote helps other woodworkers quickly find the answers and techniques that actually work in the shop.