Est. 1998 — 27 years of woodworking knowledge
Thread size on Live Center
RPE
>I am thinking of making a larger support that I want to screw on to the threads on my PM 3520 live center. I need to buy a nut that will fit on it that I can get somebody to weld a plate to.
I think is the same size as the Oneway live center. Does anyone know what size those threads are or have a way of measruing them? These are the threads on the very end of the live center where you screw on the large "cone" center.
Thanks
RP
Re: Thread size on Live Center *LINK*
John Allman(Toronto)
>The threads on the Oneway live centre are 3/4"-10.
Details at the Oneway site below.
Re: Thread size on Live Center
George Troy
>Take your live center to the hardware store and find a nut to fit your thread, that will confirm what you have. Your live center thread maybe a clone and different. GT
try this guy *LINK*
Andy in Raleigh
>click on the "Faceplates" link on his page
http://snmp.labridge.com/~wnoble/