Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Thanks to Eliot Feldman

Posts

Thanks to Eliot Feldman

#1

Thanks to Eliot Feldman

Barry W. Larson

I didn't want this to get buried in the "Donkey designs a tablesaw sled" thread, so I'm starting anew!

Many thanks to Eliot for sharing his "donkey ear" table saw sled. I've built one (with some minor modifications based on materials on hand); tried it and it works great! I'm thinking it will raise my box making to a whole new level - which, because of the level it currently resides, isn't much, but it is a start🙄😁!

Thanks again, hope you don't mind the more blatant aspects of my plagiarism. Pics to follow if (and when) I can figure out the system.

Be safe and stay well.

Barry W. Larson

Calgary, Alberta, Canada eh!

Re: Thanks to Eliot Feldman

#2

Re: Thanks to Eliot Feldman

Eliot

I couldn’t be happier! What a fine surprise! Did you include a blade guard? I hope so. I believe the sled is inherently dangerous without one because it’s designed to have the blade come all the way through the fence. I can’t wait to see what you make with it.

Re: Thanks to Eliot Feldman

#3

Re: Thanks to Eliot Feldman

Barry W. Larson

I did allow for a blade guard, but I don't have any suitable material at the moment. However once Covid is done with I see a future with much slightly used plexiglass on the market as business and industry dispense with spit guards🙄🤔😁! For now I just watch hand position - always a good idea with or without guards. I did include a short fence on the back left side to use as a grip, and I have a stop on the right side I can use to limit the travel depending on the material I am cutting.

Be safe and stay well.

Barry W. Larson

Calgary, Alberta, Canada eh!

Re: Thanks to Eliot Feldman

#4

Re: Thanks to Eliot Feldman

eliot feldman

I never thought about all that spit guard stuff that will be all over the place. I happened to have some 1/4 inch acrylic lying around that worked for me. and I always place a block of wood at the very rear of the table to enclose the blade if it gets that far back.

It's really hard for me to tell you how pleased I am about your post; sort of thing I will tell my wife tonight when she calls (she's away for a few days.)

Your life can get sort of small as you get older: family, friends, my poor(shut down) dog, Rosie -- and woodworking. Oh, I should add watercolor, i do lots of watercolor.

Re: Thanks to Eliot Feldman

#5

Re: Thanks to Eliot Feldman

roger lance

and music.....and arguing with Bill Tindall.....that can keep us both going.

Re: Thanks to Eliot Feldman

#6

Re: Thanks to Eliot Feldman

Barry W. Larson

I've always said that getting old is not for the faint of heart! I am glad you took the time to post your jig design along with an explanation of how it works and even an example of a very handsome live edge box. Another idea (the live edge box) that I may blatantly copy if I can find some suitable material. Thanks again - and if you have more ideas to copy.....

Be safe and stay well.

Barry W. Larson

Calgary, Alberta, Canada eh!

Re: Thanks to Eliot Feldman

#7

Re: Thanks to Eliot Feldman

eliot feldman

Bill and I have had some back and forth issues, but I wouldn't say that we have argued. Sometimes he has been a little hard on me for some reason. I suspect I can learn a lot from him.