Much appreciated!
Handsaws in the shop
Posts
Re: Handsaws in the shop
#27Re: Morticing a Japanese chisel handle
William Duffield
Turn and drill a new handle ....?
I would drill and turn a new handle.
The order of operations matters. I suppose it doesn't matter if you are going to install a striking ring to the finished handle. Without a striking ring, the chuck jaws leave damage to the wood and the finish of the butt end of the handle.
It is also easier and more precise to turn the tenon and fit the ferrule after you have drilled the hole for the tang.
Instead of making a square tang mortise, I use epoxy plumbers putty to fill the round mortise and shape it to the square tang and insure it doesn't loosen later. I realize this method requires destroying the handle if you ever had to remove it, but you shouldn't need to unless you want to reuse the handle after totally using up the chisel.



