WoodCentral Forums

Est. 1998 — 27 years of woodworking knowledge

Unicorning an edge

Posts

Unicorning an edge

#1

Jack Guzman from Maine

Unicorning an edge

Jack Guzman from Maine

I didn't pay attention when this subject first came up and the discussion got so big I never could figure out what it was about. Can anyone explain to me as simply as possible what Unicorning an edge means and how to do it?

Re: Unicorning an edge

#2

Re: Unicorning an edge

AlanWS

Here's a link to the article that resulted, written by the one most responsible:

https://www.woodcentral.com/cgi-bin/readarticle.pl?dir=newarticles&file=articles_958.shtml

The basic idea is that if you use a very narrow bevel, that facilitates cutting but give a fragile edge. An extremely small rounding near the edge makes it much more robust. You can do this very quickly and consistently with a soft clothe wheel charged with abrasive.

Re: Unicorning an edge

#3

Re: Unicorning an edge

Winston

David's article (which Alan linked to) is a comprehensive, in-depth resource.

I made a video about it, which can be seen here, along with some test results:

https://chisel-test.netlify.app/

Re: Unicorning an edge

#4

Re: Unicorning an edge

Jack Dover

"Hone a freshly ground bevel on a medium stone, both sides, then buff on a buffer wheel with yellow compound for about 15 seconds or until a true micro-bevel* is formed".

But you should really, really watch David's videos

* "micro-" as in "10E-6".

Re: Unicorning an edge

#5

buy the Jan issue of Pop Wood

Bill Tindall, E.Tn.

And therein you will find a dandy article on the topic, edited by our esteemed leader Elllis.

Re: Unicorning an edge

#6

My daughter says...

David Weaver

...she would recommend that article because it was obviously written by someone other than me.

I asked her why she said that, and she read one of the opening lines. She said "I know you didn't write that" (she's 11).

I said, why, sounds too happy?

"yes, too happy".

busted.

Re: Unicorning an edge

#7

nah...

Bill Tindall, E.Tn.

....the real clue was that the article didn't fill the issue :) :) :)

Re: Unicorning an edge

#8

That was going to be my next guess....

David Weaver

...if she said no. Parsimony. Discretion.

Happy, parsimony, discretion.

Dad has none of those.

Re: Unicorning an edge

#9

yes but....

Bill Tindall, E.Tn.

....you make up for it in creativity. She will learn this attribute when as a teen ager she strives to stay ahead of you and can't.

Re: Unicorning an edge

#10

Jack Guzman from Maine

Re: buy the Jan issue of Pop Wood

Jack Guzman from Maine

Glad to hear that. I have a subscription.

Re: Unicorning an edge

#11

Jack Guzman from Maine

video says it all


Re: Unicorning an edge

#12

Happy, Parsimony and Discretion...

Jim Matthews

Sounds like a drive-through lawfirm in a strip mall.

"I'll take deeds and titles with a side of estate planning, please."

👍 This page answered my questions

Your vote helps other woodworkers quickly find the answers and techniques that actually work in the shop.