A good while back I bought a Bench Dog rabbet plane, and when I got home just set it aside.
Yesterday, with a little time to spare, I cleaned it and sharpened the blade. Worked pretty well on a couple prices of scrap. That surprised me some - the mouth seems curious. It angles away from the edge, and I did not take pains to adjust to a fine, tight fit.
It went into the toolbox, and may turn out to be helpful away from the shop.
rockler was about 2 miles up the road from me, but they lifted anchor and sailed to the other side of the city.
I haven't been in there much in the last 5 years or more and never saw the line of planes (wasn't really looking, usually looking for screws if I went in there).
Looking online, it looks like they have several shoulder planes? Is the one you got a #92 stanley copy?
And after looking at my other (shoulder, sorry) planes, this one is not the only one with a mouth that slopes down and forward.
My Stanley. Clifton, LN, LV and Record all form a mouth by abutting the leading edge of the mouth perpendicular to the sole or with a slight pitch up and forward.
The Bench Dog and the HNT Gordon pitch down and forward, allowing the blade's bevel to ride up close.
I don't have any modern ones, rather a couple of older infills, but they're fixed mouth. The sloping away may be there to protect the iron in adjustment or create a sort of a wear (like a wooden plane would have).
Don't know the answer to it, but it must've worked well.