Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Desk put into service

Posts

Desk put into service

#1

Desk put into service

Bill Tindall, E.Tn.

In an exchange below on this Forum it was said that building stuff was the province of the regular forum and esoteric stuff like metal was for here. In a contrarian spirit, the kitchen desk, made with Unicorned chisels no less.......


Main wood is rift ash. Crotch panel in end, which seems out of place among the rift grain, was rescued from a dying ash on the farm. Sentiment trumps good design. The top is an experiment. Again it is made from dead worm infested ash from the farm. It didn't cost much and could be replaced.

The desk is made to be reversible should some day it service better with knee hole on left. Not a conventional design and it turned out difficult to make rather than simpler as anticipated.

Finish is Minwax acrylic. More to say about that later. Wonderful bright finish. Has the properties of blond shellac. Love it.

Re: Desk put into service

#2

Re: Desk put into service

Tony Wilkins

Looks very nice and very functional. If you have a good picture of the top I’d love to see it to see how the ash holes look.

(And rereading that no I did not mean any pun or anything by ash holes lol)

Re: Desk put into service

#3

Re: Desk put into service

John Jardin

Nice job, well done

Re: Desk put into service

#4

Re: Desk put into service

David Weaver

It looks great. When you were building it, I was suspect that it may not end up looking that great, but in context it does.

Also a good reminder that, as pro wrestlers say (I'm not a pro wrestling fan, but I love their terms for psychology of matches and working audiences), you don't have to get all of your sh*t in every match for people to call you a good (wood)worker,

The underside of the top should get a unicorn sticker.

Re: Desk put into service

#6

Re: Desk put into service

Chuck Kettler

Very nice Bill. As usual. If you need any 8/4 rift ash I have some, but do not deliver.

Re: Desk put into service

#7

revealing the ash holes for you

Bill Tindall, E.Tn.


The question is whether as the realization that ash is extinct becomes widely known wormy ash will become trendy and I will have become a trend setter. The desire to be a trend setter once in my life is compelling. I can brag about it at class reunions. Who would have guessed....... :D A woodworker friend of mine thought it ugly. I'm giving it a chance.

For those that are into show planed surfaces this ash was special. It positively glowed when planed. But it is a kitchen and something protective was desirable, if not essential. Minwax Acrylic gloss, followed by Minwax satin. Sprayed thin coat of each for close to wood look.

It is not pink like the picture shows....incandescent light and didn't color balance.

Re: Desk put into service

#8

Whatchoo talking out, Willis?

Jim Matthews

"Sentiment trumps good design. The top is an experiment. Again it is made from dead worm infested ash from the farm. It didn't cost much and could be replaced."

It's a beauty.

No sandbagging.

Re: Desk put into service

#9

Re: Desk put into service

Bill Tindall, E.Tn.

At the "History of Unicorning Symposium" at the 2047 meeting of the Woodworkers Historical Society I will see that my heirs make this piece available for display as the 1st Unicorned piece of furniture. Save a chisel and a used buff for display.

Re: Desk put into service

#10

Thanks. Looks nice!


Re: Desk put into service

#11

Re: Desk put into service

johnv

I don't care what other woodworkers say.. I really like the wormy ash, or any other wormy wood.

Re: Desk put into service

#12

Re: Very nice Bill!


Re: Desk put into service

#13

Re: Desk put into service

William Duffield

Very clean, tight design, and masterfully executed.

But, I have a concern, now that I can see the bottom rail on the drawer box side panels, and I think I understand how you attached it. Aren't you afraid that one day a century from now, the bottom rail's hide glue might fail and the rail drop on the floor? ;) I wouldn't lose any sleep over it.

Re: Desk put into service

#14

Re: Desk put into service

Virgil Johnson

Nice desk. Look forward to more info on the acrylic finish.

Re: Desk put into service

#15

Re: Desk put into service

Les Groeller

...and now for the custom built chair to match?

Re: Desk put into service

#16

no chance

Bill Tindall, E.Tn.

I built a chair early on. Realized that one would have to build several to get things just right. Settled on buying from people that knew already how to build a chair.

Re: Desk put into service

#17

I had this 'splained to me when starting out...

Jim Matthews

The three hardest things to make in wood are exterior doors, windows and chairs.

They're constantly exposed to racking forces, dragging and rough handling.

Re: Desk put into service

#18

Re: I had this 'splained to me when starting out..

Wiley Horne

Tell you who makes a strong chair—Jack Guzman. His birdcage Windsor is tight as a tuning fork. There’s just no play anywhere in the chair.

Wiley

Re: Desk put into service

#19

A sufficiently advanced technology...

Jim Matthews

..will appear to be magical.

The Windsor chair is a marvel.

My favorite Mel Gibson scene is from "The Patriot", where he weighs a completed chair that disintegrates on first use. I'm forever amazed how a pile of sticks can be comfortable.

Re: Desk put into service

#20

Re: A sufficiently advanced technology...

Joe shelton

Yeah, I like that scene a lot.

My favorite is "Aim small, miss small".

Re: Desk put into service

#21

Re: Desk put into service

Hank Knight

That's wonderful, Bill! I, too, am interested in hearing more about the Minwax acrylic finish.

My son-in-law has a lot of dead and dying ash on his family farm in Kentucky. He's gotten interested in milling it and brought me a couple of nice 6/4 pieces last week. I'm going to send him your photos and this thread she he can see what a master can do with wormy ash.

Re: Desk put into service

#22

Re: Desk put into service

Raymond in Trenton NJ

Very smart indeed Bill. That came out great. The top looks great, worm holes are neat and interesting, but the best part of the top is the grain match you did. You nailed it (pun intended). It looks seamless.

Will listen in on the finish discussions.

Thanks for sharing,

Raymond

Re: Desk put into service

#23

Re: Desk put into service

Wiley Horne

Hi Bill,

Hank’s post put this desk into focus for me. Homage to a disappearing wood. Close to the last, or maybe the very last off your properties? I also like the audacity on your part of leaving it as it was—no desire to fill it. It’s what it is, and reminds of what it was. Audacity is your long suit, by the way.

Like Raymond, I see the drawer faces as really pleasing, and they will give many years of pleasure!

Wiley