Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Bowl/chair adze

Posts

Bowl/chair adze

#1

Bowl/chair adze

Derek Cohen (in Perth, Australia)

Has anyone shopped for a bowl adze of late (for wasting chair seats)? There appears to be a dearth of the range available a few years ago. Most, if not all, of the highly recommended tools are unavailable. What is available are adzes from Pfeil, Narex and a Bulgarian source (on eBay).

Has anyone recommendations of bowl adzes? Any experience of the ones above? Anyone selling?

Regards from Perth

Derek

Re: Bowl/chair adze

#2

Jack Guzman from Maine

Jason Lonon

Jack Guzman from Maine

I follow him on facebook. According to his posts he has upped production and his tools are easier to get. If I had the money I would do it now. He makes three sizes of adzes and they are all beautiful tools. I'm waiting for him to start making inshaves.

Re: Bowl/chair adze

#3

Re: Bowl/chair adze

William Duffield

Have you tried Tim Manney? He does not appear to be actively selling tools online right now, but does have an email address for those who would like to buy a tool.

tmanney at gmail dot com

I tried one of Tim's chair seat adzes a few years ago, and it worked well. I did not, however, use it extensively enough to hollow a whole chair seat. With these, of course, it is critical to customize the handle to your hand, wrist and elbow, and the height of your bench. I am using a hand forged 18th Century bowl adze I got from the Merchant of Ashby, so that information is not going to help you at all.

Re: Bowl/chair adze

#5

Re: Bowl/chair adze

Derek Cohen (in Perth, Australia)

Thanks William. I also noted that Tim was not selling an adze. I have been in contact with him in the past, having his plans for a shave horse (which I shall get round to one of these days).

Regards from Perth

Derek

Re: Bowl/chair adze

#6

Re: Bowl/chair adze

Jim Matthews

Ebay Canada has what appears to be an unused Oshkopf adze item 392227881457.

Apparently Lee Valley once carried them.

Perhaps the seller would consider shipping just the head.

Re: Bowl/chair adze

#7

Re: Bowl/chair adze

Oskar

Hi Derek,

I bought a bowl adze last year (for roughing bowls) from an eastern european blacksmith, Bine Rovtar. Search for Rovtar Forge.

The adze works well, although the bevel is a little fat. I will thin it out at some point. The contact with Bine worked well, and it was delivered almost within time.

I think there are a few more blacksmiths in eastern europe producing greenwood tools. Etsy might be a way to find them.

Good luck

Re: Bowl/chair adze

#8

Re: Bowl/chair adze

Kevin Adams

Hi Derek,

The responses are all good and the truth is you will have to wait for a good handmade one unless you happen to find someone who didn’t take to the work after investing in the tools. Jason Lonon makes very nice tools and he has increased production a bit. His small adze with a slight flat in the middle is quite versatile for both chair seats and bowls. I used Tim Manney’s before and found it ok on pine, not so much for hardwood seats. I’m not sure he is still making them at all. Another option no one mentioned is Kestrel Tool, although I just checked their site and it appears they are on vacation for a bit, so there you go!

For chair seats you can get by without an adze, a little harder for bowls though as it’s hard work with a large gouge.

Take care,

Kevin

Re: Bowl/chair adze

#9

Re: Bowl/chair adze

Derek Cohen (in Perth, Australia)

I had a look at the Kestrel site and noted that they are on vacation. Wait time is several months at this stage. I'm not in a huge hurry, as I want the adze for chairs and stools, and I have been able to get by so far with a Ray Iles scorp and a Veritas pull shave.

I look at the lightweight Kestrel adzes and do wonder how they will work on hardwoods, such as Jarrah and Hard Maple?

Regards from Perth

Derek

Re: Bowl/chair adze

#10

Re: Bowl/chair adze *LINK*

Hank Knight

Have you looked at Caribou?


Caribou Blades

Re: Bowl/chair adze

#11

Also ... *LINK*

Hank Knight

Jim Bode Antique Tools often lists bowl adz. Get on his mailing list and he will email you a daily listing of tools on hand for sale. He currently has several bowl adz on hand, but they all look pretty large to me. He frequently lists smaller ones.


Jim Bode Tools

Re: Bowl/chair adze

#12

Re: Bowl/chair adze

Kevin Adams

I think they may be a wee bit light for your woods, Derek. They are very nice tools, well finished and balanced, but perhaps better suited for lighter or even green wood. I think Jason Lonon (JL) or Hans Karlsson if you could ever find one would be heavy enough. I have now settled on 2 adzes, a small bowl adze from JL and then recently, a chairmaker’s adze from Matty Sears. He is one John Brown’s sons (Welsh stick chairs) and makes tools in Portland, OR. You’ll have to wait though. JL’s with flat center is very versatile.

Which blade do you have with the pullshave? I tried one of those before (I used to test chair tools for LV quite a few years ago) and thought it had a lot of potential. It was very different from what it started out as, which was more of a traditional travisher shape. I would be tempted to shorten the handle perhaps to give more room for maneuvering as you are using it. The blade is very easy to sharpen though like a scrub blade and it is typical Veritas ingenuity!

Thanks for always sharing your projects and ideas btw, you do some very nice work!

Kevin

Re: Bowl/chair adze

#13

Re: Bowl/chair adze

Derek Cohen (in Perth, Australia)

Hank, I’ve been to the Caribou site before and found it soooo frustrating! There are a lot of tools, and they look exceptionally well made. Navigating it is not easy, and then after hunting around for eternity, you realise that you have to email them for any prices. I have no idea what a chair adze would cost.

Regards from Perth

Derek

Re: Bowl/chair adze

#14

Re: Also ...

Derek Cohen (in Perth, Australia)

I’ve been keeping an eye on Jim’s site for one of the better-known modern makers, but these have not surfaced. There are a few smaller, curved, vintage bowl adzes on the site, but I am not interested in one of those as I have no idea how suited they are to chairs, plus the heads look rough, with the bevel in the inside (which I do not want). Still, I go back there every now-and-then.

Regards from Perth

Derek

Re: Bowl/chair adze

#15

Re: Bowl/chair adze

Mike in Zuni VA

Derek,

I initially trained in chair making under Drew Langsner at Country Workshops. CW eventually got into making and selling green woodworking tools. Drew had ties to Sweden when he first started out in woodworking He started having some of these Swedish craftspeople to supply a lot of the tools they sold at CW. Alas, CW is no more, since Drew's retirement. However, there is a place in Maine that has now taken over as a distributor for Drew in the US. It is The Maine Coast Craft School. I have included a link to their tool page http://www.mainecoastcraft.com/tool-sales.html.

Drew's major suppliers were H. Karlsson Klensmide and S. Djarv Hantverk. I have included links to their sites as well: http://www.klensmide.se/ this site is in Swedish and I could not tell you what is says; and http://www.djarv.se/djarvenglish/startsida.asp which is an English language web site.

I have several of the tools that Drew sold. They were all top notched that were designed by users of the tools. The ones that I bought was properly sharpened, honed, and polished right out of the box. NO work needed prior to use!

I hope this will put you on the road to locating an adequate adze for your endeavors.

Mike in Zuni VA

Re: Bowl/chair adze

#16

Re: Bowl/chair adze

Derek Cohen (in Perth, Australia)

Many thanks Mike.

I have previously visited S. Djarv Hantverk. Unfortunately, there is the following notice ..

During the years the interest for our tools have increased and we are sorry to say that we no longer have the possibility to send individual and separate tools to our customers.

The website for the The Maine Coast Craft School states "SHORT HANDLED HANS KARLSSON 60MM BOWL ADZE - VERY BACK ORDERED"

and ...

JASON LONON STANDARD BOWL ADZE WITH SHEATH

Sold Out

This is why I came asking for advice. Everywhere I turn the decent adzes are sold out and backlisted for years.

I am not in a big rush. After the current piece is done, my wife has lined up a whole host of chores around the house! :( Our son just announced his engagement, and there is a possibility that the wedding could be at our home ....

Regards from Perth

Derek

Re: Bowl/chair adze

#17

Re: Bowl/chair adze

Scott (Cariboo Blades)

We're sorry if your you're having trouble navigating our site. On the Carving adze page the prices for the adze we make are there. We only make custom to order so it is necessary for you to contact us for your specs. We don't have any phone service so you will have to email. It's good it is a hard copy. There is a 4 month wait right now.

Re: Bowl/chair adze

#18

Re: Bowl/chair adze

Joe shelton

I recently bought Barr Quarton's adze which is configured as Mike Dunbar specified. I think it's terrific and fun to use.

Subject to availability, you can get them from Barr Specialty Tools and from Highland Woodworking.

Re: Bowl/chair adze

#19

Jack Guzman from Maine

Dunbar Adze

Jack Guzman from Maine

Mike Dunbar uses a long handled adze and places the seat blank on the floor to hollow it. I have used this method and it works fine.