Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Removing twist

Posts

Re: Removing twist

#26

Re: no, no, no

david weaver

I couldn't find a hit on either of those on google for a while, but realized that if the text string is kept sequential, it turns up a pretty long history of variants. "for a six pence", "for a pence", "skin a fart to chase a nickel down the road".

My relatives had a gift for never using profanity but still talking in a way that you'd be afraid to bring polite company around them.

Re: Removing twist

#27

Rest assured.....

Bill Tindall, E.Tn.

Google never met my Uncle Willy so his colorful language died with him.

Re: Removing twist

#28

Copying pencils? *LINK*

John in NM

I think that is what you are referring to. Kinda neat invention, along with the tissue paper bound volumes that went with them. The days before Xerox! I wonder if the millennials know that "xeroxing" used to mean the act of photocopying....

I used to love getting new Dixon #2's.... A couple years ago I bought a couple big packages of Ticonderogas on sale at Staples, I think it was 100 for $10.... figure that is close to a lifetime supply for the shop. If only I could get the wife to quit chewing them when she works in the shop!


https://en.wikipedia.org/wiki/Copying_pencil

Re: Removing twist

#30

Nice!

david weaver

So, those pencils may have been licked too many times causing us to have to lick them more.

I wonder what the "lead" was made of in them. I'm sure (nearly sure) it wasn't actually lead.

My mother does a lot of painting, not fine painting, but painting that pays. I've seen her still licking pencils and forming bristles in her mouth (she paints mostly with acrylic, it's probably harmless).

I'd say she's not that old (71), though I'm sure some younger people would disagree with that being "not that old".

Re: Removing twist

#31

"Lead" pencils *LINK*

Bill Houghton, Sebastopol, CA

It appears, according to Wikipedia, that the term "lead pencil" derives from a misunderstanding of graphite from the early days of making pencils from it: people thought the graphite deposits they were mining to make pencils were actually lead deposits.


https://en.wikipedia.org/wiki/Pencil

Re: Removing twist

#32

Re: Copying pencils?

Hank Knight

The Xerox Corporation took a lesson from Kleenex and spent a lot of time and money to rescue their trade name from, becoming a generic term. They were successful; people now generally use the term "photocopy" instead of "Xerox" to describe both the process and the physical copy. Kimberly-Clark wasn't so diligent. Their "Kleenex" brand has become the generic term for facial tissues.

Re: Removing twist

#33

Re: Copying pencils?

John in NM

I have to wonder if it matters.... Just in my day to day life, it doesn't seem to have made a difference how we call photocopying - the machine we use in the office at work is still a Brother or Toshiba or something, just as tissues are generic.

Re: Removing twist

#34

Re: Nice!

rum

I admit this ended up being yet another weird rabbit hole haha.

The other thing I've found is that some of the art pencils have more intense color release if they're soaked (https://steemit.com/art/@erangvee/soaking-my-colored-pencils-or-experiment-drawing). I'm not saying that's what your mom's doing but its definitely possible.. There are also apparently "watercolor" pencils (https://www.jetpens.com/blog/how-to-use-watercolor-pencils/pt/972) which actually look pretty cool as well.

I would be mildly surprised if any (or at least many) modern pencils had the more toxic forms of analine dyes used in them nowadays. It's possible.. but imho unlikely. So your mom is likely ok unless she's using pencils from pre early 70's, in which case I'd probably be about as concerned about the probability of lead based paint on the outside.

I'd probably also take that newspaper link assertion as to the pencil getting harder post wetting with a mild grain of salt, it's certainly plausible I guess but without better validation I'm mildly sceptical. I've found the same typescript in scanned articles from at least as far back as 1896 through the early 30's so it was good enough copy to be heavily borrowed anyway.

Current best hypothesis is that it's a carry over from wetting the copy pencils when helped release the dye so they worked better. The couple of reports I've found of people trying that indicate that the old ones were far from delicious which maybe puts a wrench in that theory, perhaps if you were a three pack a day smoker the flavor wouldn't stand out as much. I can't strictly rule out that some earlier pencils had clay binders that released better when wetted and that could have been carried over as well.

There is also the distinct possibility that the fact that a lot of early pencils had lead paint on them might have made them deliciously sweet to the taste as well.. so kids being kids might well have picked up a bad habit unknowingly because of the flavor.

Re: Removing twist

#35

Re: Copying pencils?

Hank Knight

It matters it you are the owner of an intellectual property interest in a trade name. Probably doesn't matter to the rest of us.

Re: Removing twist

#36

Re: Copying pencils?

John in NM

Well, they are certainly welcome to discourage the use of their name in that way. I can't see that it really did any good with Xerox or harm with Kleenex though....

Re: Removing twist

#37

Re: Hand work

Charlie

I think we're collectively living in a dream world if don't know that power tool based operations deal with twisted lumber all the time (more often than the relatively small universe of hand tool woodworkers does), and not necessarily by ripping and regluing it.

There are makers of stunning extremely high-end custom furniture and other items of fine craft woodworking who wouldn't dream of processing rough sawn lumber by hand, or at least not very often. They're getting to where they get somehow. Maybe all the stock they buy is just magically flat and straight right off the truck.

I think the notion that this crowd is somehow flummoxed by processing a twisted board with power misses the mark widely. But, maybe the price point at which they sell their wares allows them to just pick up another board. That doesn't sound like such a bad place to be either.

Re: Removing twist

#38

Re: Hand work

David Weaver

I'll take portable planer for 200, Alex.

There are enough straw people in this discussion to bed a dairy herd for a year.

Re: Removing twist

#39

Re: Hand work

Charlie

Oh no, David, the question was What is a power JOINTER?, not power planer. No Final Jeopardy for you!

Re: Removing twist

#40

Re: Hand work

Warren in Lancaster, PA

I know woodworkers with 24 inch jointers. I am talking about 24 inches wide. They routinely use 5/4 stock to mill a 7/8 board.

Re: Removing twist

#41

Power/Hand Tool Milling

Steve Elliott

Milling rough lumber to finished size is one of my favorite parts of the work I do. In commercial cabinet and furniture shops milling is done with power equipment, at least if you want to keep your job. Those are the hard facts of my situation, not a dig at hand tool work.

To prepare 7/8” stock for frame and panel doors (where it is essential that the stock be straight and not twisted) I’d start by looking for boards that were straight enough and thick enough to yield the parts I need. Straight 4/4 stock would be easy to use, and bowed or twisted boards would do for shorter lengths.

Getting the thickest and widest straight piece out of a given chunk of rough lumber has been the goal of my milling technique and I’ve found ways to do it with power equipment. Finesse on the jointer is the key, and knowledge of wood tension is important. For a simple tool, the jointer can be used in quite a number of ways that go beyond just pushing a board across. To remove stock from the convex side of a board I start by using a taper jointing technique, where the leading end of the board is set onto the outfeed table so that zero wood is removed from a place where I need all the wood I can get. To remove twist, I put down-pressure on the middle of the board (which starts the cut resting on the far end of the infeed table). When executed successfully using several passes over the jointer, the result is a board that still has a few marks from the rough-sawn surface showing at each end. Usually the jointed face is a little concave due to tension released by removing wood from only one side of the board. When the piece goes through the planer it tends to straighten out because wood is being removed from the other side.

Doing the same operation using hand tools requires the same knowledge of wood and tools, and the same good result can be achieved.

I’ve now been working for 40 years and can understand why most shops would buy 5/4 stock to make 7/8” pieces: it gives a better chance that even a less-experienced worker will be able to produce the necessary product. It also makes it possible to order stock from a supplier without looking at every board. For an increase in materials cost of about 25% the chance of success is likely at least doubled.

I like using hand tools too and when I retire I won’t have the sort of power equipment I’m used to. I’d rather be able to produce good work using simple tools than own a bunch of big, expensive equipment.

Re: Removing twist

#42

Re: Power/Hand Tool Milling Exhibit A

Bill Tindall, E.Tn.

Exhibit A Shown below is a corner cupboard where every piece in it is a shade over 7/8", even the crown and excepting the panels and backs. It didn't matter what thickness I wound up with; I just stopped planing when all the stock I needed was cleaned up. No boards were rejected from rough stock because I was worried they would not make thickness. This result is typical, not the experience claimed by Warren.



I regard coaxing the most from my lumber stash a fun challenge.

Steve: Milling rough lumber to finished size[with machines] is one of my favorite parts of the work I do

I easily relate to this statement. I'll match my skill at coaxing finished lumber from rough lumber by machine with any hand tool enthusiast. There is nothing different in the wood removed to achieve a plane surface, regardless the technique. It turns out as far as this operation is concerned, experience is what is important, not the tools used. My years of standing beside a jointer yields the same result as someone else's XX years pushing a hand plane. Search somewhere else to find a superior outcome.

Where I don't agree is that it is common for shops to buy 5/4 to get 7/8". I sold hardwood for nearly 30 years so I should have some insight of what is bought for what purpose. I have turned more hardwood into furniture than most of you and I never resorted to 5/4 lumber to get a finished 7/8" thickness. You do what Steve describes to get your 7/8" parts.

Hardwood is rough sawed 1 1/8" to 1 1/16" depending on the accuracy of the saw and the risk the mill is willing to take. To meet grade, 4/4 lumber must be at least 1" after drying. In fact it is often about 1 1/16" after drying and occasional pieces are 1 1/4 because of the details of how logs are sawed. This lumber easily cleans up at 7/8" if there is little cup or twist in the cutting that needs to be 7/8". If someone is foolishly achieving finished size of the whole board and then making cuttings, they are not part of this conversation.

If somewhere in the world there is a shop that only uses 7/8" lumber and can not use 13/16 at all, this shop might choose to buy 5/4 lumber (that is MORE than 5/4 more expensive) or they might discard the 4/4 lumber that didn't entirely clean up at 7/8. I have no idea what the better strategy might be. It's too rare to consider.

Re: Removing twist

#43

Re: Power/Hand Tool Milling Exhibit A

Bruce, a MN Galoot

Last night at our woodworking club shop, a guy walked in with a 6/4” board that was cupped, bowed and twisted. He asked me how to get some usable lumber from it. I told him to cut to the lengths he needed, run one face over the jointer to get it flat and then run it through the planer.

What did he do? He disregarded everything I said, ran it through the planer until it was thinner (but still twisted, cupped and bowed), cut it to length, glued it into an 18” wide piece and then spent the next 1.5 hours sanding it flat with a ROS. I could only shake my head.

Re: Removing twist

#44

Re: Power/Hand Tool Milling Exhibit A

AZ in Colorado Springs

I volunteer at the air Force academy wood hobby shop and teach introductory classes there. It's baffling how people ask the proper way to accomplish something, then stick with: 1) I read this on the internet, 2) this is the way I've always done it (then why ask for advice), or 3) I remember my (dad, uncle, grandpa, a neighbor) did it this way.

Re: Removing twist

#45

Re: Power/Hand Tool Milling Exhibit A

Bruce, a MN Galoot

After he had finished, I explained how easily he could have flattened that piece with a scrub plane, also beyond his comprehension.

Re: Removing twist

#46

Internet learning

Bill Tindall, E.Tn.

I am watching a son-in-law "learn" woodworking from the Internet. A recent article made the experience more clear.

The business model of companies providing these "free" sources of information is- induce someone to look, then force advertising upon them that the advertiser is willing to pay the hosting company to provide.

"Perfect Hand Cut dovetails Every Time" is going to induce more people to open a link than a realistic title for instruction. Even "Dovetails with a pruning saw" will get hits. My son in law shows me this stuff! The more unbelievable it is the more it gets opened for advertising. There is no motivation to provide true or reliable information. Someone wanting to learn is easy prey.

Relying on amateurs to provide these provocative titles and "information" has been limiting to the growth of advertising revenue. A recent article described companies that crank out click inducing pictures, titles and content which the Internet companies gleefully pay for when it works. Some of the most opened are "Diamonds made in your microwave" and "Grow a rose in a potato". Can "make gold from lead" be far behind? Utube, the Internet equivalent of the National Enquirer.

Thankfully we have this Forum where the content is peer reviewed.